The system may not detect objects with surfaces that absorb reflection. Always drive with due care and attention. Failure to take care may result in a crash.
To help avoid personal injury, always use caution when in reverse (R) and when using the sensing system.
The system may not detect small or moving objects, particularly those close to the ground.

Note:  Some accessories such as large trailer hitches, bike or surfboard racks can cause reduced performance or false alerts.
Note:  Keep the sensors free from snow, ice and large accumulations of dirt.Blocked sensors may affect system accuracy.Do not clean the sensors with sharp objects.
Note:  If your vehicle sustains damage leaving the sensors misaligned, this will cause inaccurate measurements or false alerts.
Note:  The sensing system cannot be turned off when a MyKey is present. See  Principle of Operation
We recommend that you take some time to get to know the system and its limitations by reading this section.
The sensing system warns the driver of obstacles within a certain range of your vehicle. The system automatically turns on each time you switch the ignition on.
 You can turn the system on or off by pressing the parking aid button. If your vehicle does not have a parking aid button, the system can be switched off through the information display menu or from the pop-up message that appears once you shift the transmission into reverse (R). See  General Information
If a fault is present in the system, a warning message appears in the information display and does not allow you to switch the system on.