Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes.

Note:  Cruise control disengages if the vehicle speed decreases more than 10 mph (16 km/h) below the set speed when driving uphill.
Note:  When you are going downhill while using cruise control, the battery charging system and engine work together to help maintain the set speed.Engine noise may increase or decrease under these conditions.
Missing Image
The cruise controls are on the steering wheel.
Switching Cruise Control On
Press ON.
Missing Image  The indicator appears in the information display.
Setting the Cruise Speed
  1. Drive to desired speed.
  1. Press SET+ or SET-.
  1. Take your foot off the accelerator pedal.
Note:  The indicator changes color.
Changing the Set Speed
Note:  If you accelerate by pressing the accelerator pedal, the set speed will not change.When you release the accelerator pedal, your vehicle returns to the speed that you previously set.
  • Press SET+ or SET- to change the set speed in small increments.
  • Press the accelerator or brake pedal until you reach the desired speed. Press SET+ or SET-.
  • Press and hold SET+ or SET-. Release the control when you reach the desired speed.
Canceling the Set Speed
Press CAN or tap the brake pedal. The set speed does not erase.
Resuming the Set Speed
Press RES.
Switching Cruise Control Off
Note:  You erase the set speed when you switch the system off.
Press OFF when the system is in standby mode, or switch the ignition off.
Switching to ECO Cruise
 Using cruise control with ECO Cruise switched on may change the operation of the system. This feature saves vehicle energy by relaxing acceleration compared to standard cruise control. For example, your vehicle may temporarily lose speed when going uphill.
For Energi vehicles, you can switch on ECO Cruise using the information display.
For Hybrid vehicles, press ECO on the center console.
For additional information, refer to ECO Cruise and EcoSelect.