Use the information display to create a MyKey:
  1. Insert the key you want to program into the ignition. See  Starting a Gasoline Engine.  If your vehicle is equipped with a push-button start, place the remote control into the backup position. See Passive Anti-Theft System - Canada/China/Japan/Mexico/Taiwan/United States of America, Vehicles Built From: 22-02-2016
  1. Switch the ignition on.
  1. Access the main menu on the information display controls. Use the arrow keys to get to the following menu selections:

Message  Action and Description 
Settings
Press the OK button or the right arrow key. 
MyKey
Press the OK button or the right arrow key. 
Create MyKey
Press the OK button or the right arrow key. 

When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The key will be restricted at the next start.
MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys.
You can also program configurable settings for the key(s). See Programming/Changing Configurable Settings.
Programming/Changing Configurable Settings
Use the information display to access your configurable MyKey settings.
  1. Switch the ignition on using an admin key or remote control.
  1. Access the main menu on the information display controls. Use the arrow keys to get to the following menu selections:

Message  Action and Description 
Settings
Press the OK button or the right arrow key. 
MyKey
Press the OK button or the right arrow key. 

Note:  You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the vehicle off, however, you will need an admin key to change or clear your MyKey settings.