You can use the power door lock control or the remote control to lock and unlock the vehicle.
Power Door Locks
The power door lock control is on the driver and front passenger door panels.
Door Lock Indicator
An LED on each door window trim will light when you lock the door. It will remain lit for up to 10 minutes after you switch off the ignition.
When you electronically lock your vehicle, the power door lock switch will no longer operate after 20 seconds. You must unlock your vehicle with the remote control or keyless keypad, or switch the ignition on, to restore function to these switches. You can switch this feature on or off in the information display. See General Information.
Rear Door Unlocking and Opening
Pull the interior door release handle twice to unlock and open the rear door. The first pull unlocks the door and the second pull will unlatch the door.
You can use the remote control at any time. The luggage compartment release button will only work when the vehicle speed is less than 5 mph (8 km/h).
Unlocking the Doors (Two-Stage Unlock)
Press the button to unlock the driver door.
Press the button again within three seconds to unlock all doors. The turn signals will flash.
Press and hold both the lock and unlock buttons on the remote control for three seconds to change between driver door or all doors unlock mode. The turn signals will flash twice to indicate a change to the unlocking mode. Driver door unlock mode will only unlock the driver door when the unlock button is pressed once. All door unlock mode will unlock all doors with one press of the unlock button. The unlocking mode applies to the remote control, keyless entry keypad and intelligent access. You can also change the mode in the information display. See General Information.
Locking the Doors
Press the button to lock all the doors. The turn signals will illuminate.
Press the button again within three seconds to confirm that all the doors are closed. The doors will lock again, the horn will sound and the turn signals will illuminate if all the doors and the luggage compartment are closed.
If the lock feature fails to operate, you can individually lock the doors using the remote control key blade in the position shown.See
On the left-hand side, turn the key clockwise to lock. On the right-hand side, turn the key counterclockwise to lock.
If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn will sound twice and the lamps will not flash. You can enable or disable this feature in the information display. See Information Displays.
Opening the Luggage Compartment
Press twice within three seconds to open the luggage compartment.
Make sure to close and latch the luggage compartment before driving your vehicle. An unlatched luggage compartment may cause objects to fall out or block your view.
Activating Intelligent Access
You must have the intelligent access key within 3 feet (1 meter) of your vehicle.
At a Door
Pull an exterior door handle to unlock and open the door. Make sure not to touch the lock sensor on top of the handle.
Touch the top of the door handle to lock your vehicle. There will be a brief delay before you can unlock your vehicle again.
Keep the door handle surface clean to avoid issues with operation.
At the Luggage Compartment
Press the exterior release button hidden above the license plate.
Smart Unlocks For Integrated Keyhead Transmitter
This feature helps to prevent you from locking yourself out of your vehicle if your key is still in the ignition.
When you open one of the front doors and lock the vehicle with the power door lock control, all the doors will lock then unlock and the horn will sound twice if your key is still in the ignition.
You can still lock your vehicle with the key in the ignition. To do this, use the keyless entry keypad with the driver door closed, or press the lock button on the transmitter even if the doors are not closed.
If both front doors are closed, you can lock your vehicle by any method, regardless of whether the key is in the ignition or not.
Smart Unlocks For Intelligent Access Keys
This feature helps to prevent you from unintentionally locking your intelligent access key inside your vehicle’s passenger compartment or rear cargo area.
When you electronically lock your vehicle (with any door open, vehicle in park and ignition off), the vehicle will search for an intelligent access key in the passenger compartment after you close the last door. If your vehicle finds a key, all of the doors will immediately unlock and the horn will sound twice, indicating that a key is inside.
You can override the smart unlock feature and intentionally lock the intelligent access key inside your vehicle. To do this, lock your vehicle after you have closed all the doors by:
using the keyless entry keypad
pressing the lock button on another intelligent access key
touching the locking area on the handle with another intelligent access key in your hand.
When you open one of the front doors and lock your vehicle using the power door lock control, all doors will lock then unlock if:
the ignition is on, or
the ignition is off and your vehicle is not in P.
If you press the unlock button on the remote control and do not open a door within 45 seconds, your vehicle will lock and the alarm will arm. You can enable or disable this feature in the information display. See General Information.
The autolock feature will lock all the doors when:
all doors are closed,
the ignition is on,
you shift into any gear putting your vehicle in motion, and
your vehicle attains a speed greater than 12 mph (20 km/h).
The autolock feature repeats when:
you open then close any door while the ignition is on and your vehicle speed is 9 mph (15 km/h) or lower, and
your vehicle then attains a speed greater than 12 mph (20 km/h).
The autounlock feature will unlock all the doors when:
the ignition is on, all the doors are closed, and your vehicle has been in motion at a speed greater than 12 mph (20 km/h);
your vehicle comes to a stop and you switch the ignition off or to accessory; and
you open the driver door within 10 minutes of switching the ignition off or to accessory.
The doors will not autounlock if you electronically lock your vehicle after you switch the ignition off and before you open the driver door.
Enabling or Disabling
You can enable or disable the autolock and autounlock features independently of each other.
You can enable or disable these features in the information display or your authorized dealer can do it for you. See General Information.
The interior lamps and select exterior lamps will illuminate when you unlock the doors with the remote entry system.
The illuminated entry system will turn off the lights if:
the ignition is on,
you press the remote control lock button, or
after 25 seconds of illumination.
The lights will not turn off if:
you turn them on with the lamp control, or
any door is open.
The interior lamps and select exterior lamps will illuminate when all doors are closed, you switch the ignition off and you remove the key from the ignition (integrated keyhead transmitter only).
The lamps will turn off if all the doors remain closed and:
25 seconds elapse
you insert the key in the ignition (integrated keyhead transmitter only)
you press the START/STOP button (intelligent access key only).
If you leave the courtesy lamps, dome lamps or headlamps on, the battery saver will shut them off 10 minutes after you switch the ignition off.
Accessory Mode Battery Saver for Intelligent Access Keys (If Equipped)
If you leave your vehicle in the run ignition state, it will shut off once it detects a certain amount of battery drain or after 45 minutes.
With the Remote Control
Press twice within three seconds to unlatch the trunk.
From Outside Your Vehicle
Press the release button above the license plate to unlatch the trunk. Your vehicle must be unlocked or have an intelligent access transmitter within 3 feet (1 meter) of the trunk.