Note:  Cruise control will disengage if the vehicle speed decreases more than 10 mph (16 km/h) below the set speed while driving uphill.
Missing Image
The cruise controls are on the steering wheel.
Switching Cruise Control On
Missing Image
Press ON.
Missing Image  The indicator appears in the information display.
Setting the Cruise Speed
  1. Drive to desired speed.
  1. Press SET+ or SET-.
  1. Take your foot off the accelerator pedal.
Changing the Set Speed
  • Press SET+ or SET- to change the set speed in small increments.
  • Press the accelerator or brake pedal until you reach the desired speed. Press SET+ or SET-.
  • Press and hold SET+ or SET- to change the set speed in large increments. Release the control when you reach the desired speed.
Canceling the Set Speed
 Press CNCL or tap the brake pedal. The set speed does not erase.
Resuming the Set Speed
Press RES.
Switching Cruise Control Off
Press OFF when the system is in standby mode, or switch the ignition off.
Note:  You erase the set speed when you switch the system off.