WARNING
The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage.
Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
Reverse your vehicle as slow as possible, higher speeds may limit your reaction time to stop your vehicle.
Use caution when the rear cargo door is ajar. If the rear cargo door is ajar, the camera will be out of position and the video image may be incorrect. All guidelines disappear when the rear cargo door is ajar. Some vehicles may not come equipped with guidelines.
Do not switch the camera features on or off when your vehicle is moving.

The rear view camera system provides a video image of the area behind your vehicle.
During operation, lines appear in the display which represent your vehicle’s path and proximity to objects behind your vehicle.
Missing Image
The camera is located on the rear cargo door.
Using the Rear View Camera System
The rear view camera system displays what is behind your vehicle when you place the transmission in reverse (R).
Note:  The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects.
The system uses two types of guides to help you see what is behind your vehicle:
  • Fixed guidelines: Show the actual path your vehicle is moving in while reversing in a straight line. This can be helpful when backing into a parking space or aligning your vehicle with another object behind you.
  • Centerline: Helps align the center of your vehicle with an object.
Note:  If the transmission is in reverse (R) and the luggage compartment is open, no camera features will display.
The camera may not operate correctly under the following conditions:
  • Nighttime or dark areas if the reverse lamps are not operating.
  • Mud, water or debris obstructs the camera's view. Clean the lens with a soft, lint-free cloth and non-abrasive cleaner.
  • The camera is misaligned due to damage to the rear of your vehicle.
Camera Guidelines
Note:  Active guidelines are only available when the transmission is in reverse (R).
Note:  Upon a battery disconnect, the active guidelines may not be functional until your vehicle has been driven a short distance and exceeds a speed of 12 mph (20 km/h).
Missing Image
AActive guidelines
BCenterline
CFixed guideline: Green zone
DFixed guideline: Yellow zone
EFixed guideline: Red zone
FRear bumper
Active guidelines only show with fixed guidelines. To use active guidelines, turn the steering wheel to point the guidelines toward an intended path. If the steering wheel position changes while reversing, your vehicle might deviate from the original intended path.
The fixed and active guidelines fade in and out depending on the steering wheel position. The active guidelines do not show when the steering wheel position is straight.
Always use caution while reversing. Objects in the red zone are closest to your vehicle and objects in the green zone are farther away. Objects are getting closer to your vehicle as they move from the green zone to the yellow or red zones. Use the side view mirrors and rear view mirror to get better coverage on both sides and rear of your vehicle.
Manual Zoom
WARNING
When manual zoom is on, the full area behind your vehicle may not show. Be aware of your surroundings when using the manual zoom feature.

Note:  Manual zoom is only available when the transmission is in reverse (R). When manual zoom is enabled, only the centerline is shown.
Selectable settings for this feature are Zoom in (+) and Zoom out (-). Press the symbol in the camera screen to change the view. The default setting is Zoom OFF.
This feature allows you to get a closer view of an object behind your vehicle. The zoomed image keeps the bumper in the image to provide a reference. The zoom is only active while the transmission is in reverse (R). When the transmission shifts out of reverse (R), the feature automatically turns off and must be reset when it is used again.
Camera System Settings
The rear view camera system settings can be accessed through the display screen. See General Information
Enhanced Park Aids or Park Pilot
Selectable settings for this feature are ON and OFF.
The system uses red, yellow and green highlights that appear on top of the video image when any of the sensing systems detect an object.
Vehicles equipped with touchscreen
The system will provide an image of your vehicle and the sensor zones. The zones will highlight green, yellow and red when the parking aid sensors detect an object in the coverage area.
The coverage area is up to 6 ft (1.8 m) from the rear bumper. There is decreased coverage area at the outer corners of the bumper.
Missing Image
For additional information of the zone coverage and the rear sensing system. See  Principle of Operation
Rear Camera Delay
Selectable settings for this feature are ON and OFF.
The default setting for the rear camera delay is OFF.
When shifting the transmission out of reverse (R) and into any gear other than park (P), the camera image remains in the display until:
  • Your vehicle speed sufficiently increases.
  • You shift your vehicle into park (P).
  • You pull the hand brake on vehicles with a manual transmission.