Set the delay time to keep the headlamps on for up to three minutes after switching off the ignition.
Follow the steps below to change the delay time:
Note:  Complete steps 1 through 6 within 10 seconds.
  1. Switch the ignition off.
  1. Select the autolamp position on the lighting control.
  1. Switch the lighting control to the off position.
  1. Switch the ignition on.
  1. Switch the ignition off.
  1. Select the autolamp position on the lighting control. The headlamps and parking lamps turn on.
  1. Switch the lighting control to the off position when reaching the required delay time. The headlamps and parking lamps turn off.
Set the headlamp exit delay to one of the following settings:
  • Off.
  • 10 seconds.
  • 20 seconds.
  • 120 seconds.
Note:  Adjust the time delay using the display controls in the information display. See Information Displays.