Use the information display to create a MyKey.
  1. Switch the ignition on using the key or the transmitter you want to program. If your vehicle has a push-button start, place the transmitter into the backup slot.See Passive Anti-Theft System. 
  1. Access the main menu in the information display and then scroll through the menus to begin programming your MyKey.   See  Information Displays
  1. Follow the instructions in the display.
  1. A confirmation message appears in the display after you finish programming your MyKey. The programmed restrictions apply when you key off, open and close driver door and restart your vehicle with the programmed key or transmitter.
Note:  Make sure you label the programmed MyKey so you can distinguish it from the admin keys.
You can also program the optional MyKey settings.
Programming or Changing Configurable Settings
Use the information display to program or change your optional MyKey settings.
  1. Switch the ignition on using the key or the transmitter you want to program.
  1. Access the main menu in the information display and then scroll through the menus to change the settings of your MyKey.   See  Information Displays
  1. Follow the instructions in the display.
  1. A confirmation message appears in the display after you finish programming your MyKey. The programmed restrictions apply when you key off, open and close the driver door and restart your vehicle with the programmed key or transmitter.
Note:  You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. If you switch the engine off, you must use an admin key to change or clear your optional MyKey settings.