Fully defrost the windshield before you switch the windshield wipers on.
Make sure you switch the windshield wipers off before entering a car wash.
If streaks or smears appear on the windshield, clean the windshield and the wiper blades.If that does not resolve the issue, install new wiper blades.
If you switch autolamps and autowipers on, the headlamps turn on when the windshield wipers continuously operate.
Wet or winter driving conditions with ice, snow or salty road mist can cause inconsistent and unexpected wiping or smearing.
The feature uses a rain sensor that is in the area around the interior mirror. The rain sensor monitors the amount of moisture on the windshield and turns on the wipers. It adjusts the wiper speed by the amount of moisture that the sensor detects on the windshield. You can switch this feature on and off in the information display. See Information Displays.
Use the rotary control to adjust the sensitivity of the autowipers.When you select low sensitivity, the wipers operate when the sensor detects a large amount of water on the windshield.When you select high sensitivity, the wipers operate when the sensor detects a small amount of water on the windshield.
Keep the outside of the windshield clean. The rain sensor is very sensitive and the wipers may operate if dirt, mist or insects hit the windshield.
In these conditions, you can do the following:
- Lower the sensitivity of the autowipers to reduce the amount of smearing on the windshield.
- Switch to normal or high-speed wipe.
- Switch autowipers off.
Autowipers default to on and remain on until you switch them off in the information display. When you switch off autowipers, the wipers operate in intermittent mode.