Note:  Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may display abbreviated or shortened depending upon which cluster type you have.
Missing Image
Press the OK button to acknowledge and remove some messages from the information display. Other messages delete automatically after a short time.
You need to confirm certain messages before you can access the menus.
4WD

Message  Action 
4WD Temporarily Disabled  The four wheel drive system has automatically disabled itself due to the system overheating. 
4WD Off  The four wheel drive system has automatically disabled itself due to the system overheating or you are using the spare tire. 
4WD Restored  The four wheel drive system resumes normal function and clears this message after driving a short distance with the road tire re-installed or after the system cools. 
4WD Malfunction Service Required  The four wheel drive system is not operating properly and the powertrain fault indicator illuminates.   See  Warning Lamps and Indicators.  If the warning stays illuminated or continues to illuminate, contact an authorized dealer as soon as possible. 
Change 4WD Power Transfer Unit Lube  Displayed when the transfer case fluid requires service. 
4WD Power Transfer Unit Lube Set to New  Displayed when the transfer case fluid has been changed and reset to new. 

Adaptive Cruise Control

Message  Action 
Adaptive Cruise Malfunction  A radar malfunction is preventing the adaptive cruise from engaging.   See  Using Adaptive Cruise Control.   
Adaptive Cruise Not Available  Conditions exist such that the adaptive cruise cannot function properly.   See  Using Adaptive Cruise Control.   
Adaptive Cruise Not Available Sensor Blocked See Manual  The radar is blocked because of poor radar visibility due to bad weather or ice/mud/water in front of radar. Driver can typically clean the sensor to resolve.   See  Using Adaptive Cruise Control.   

AdvanceTrac™

Message  Action 
Service AdvanceTrac  The system detects a malfunction due to a blocked sensor. 
AdvanceTrac Off On  The driver has disabled or enabled the traction control. 

Alarm

Message  Action 
Vehicle Alarm To Stop Alarm, Start Vehicle  Unauthorized entry triggered the alarm.   See  Anti-Theft Alarm.   

Automatic Engine Shutdown

Message  Action 
Engine Shuts Off In XX Seconds  The engine is preparing to shutdown. 
Engine Shut Off For Fuel Economy  The engine has shutdown to help increase fuel economy. 
Engine Shuts Off in XX Seconds Press OK to Override  The engine is preparing to shutdown. You can press OK on the left steering wheel button to override the shutdown. 

Automatic High Beam Control

Message  Action 
Front Camera Low Visibility Clean Screen  The front camera sensor has reduced visibility.Clean the windshield. 
Front Camera Malfunction Service Required  The system requires service due to a malfunction. Contact an authorized dealer. 
Front Camera Temporarily Not Available  The front camera sensor has malfunctioned.Wait a short period of time for the sensor to cool down. 

Battery and Charging System

Message  Action 
Check Charging System  The charging system needs servicing. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible. 
Low Battery Features Temporarily Turned Off  The battery management system detects an extended low voltage condition. Your vehicle will disable various features to help preserve the battery. Turn off as many of the electrical loads as soon as possible to improve the system voltage. Once the system voltage recovers, the disabled features will operate as normal. 
Turn Power Off to Save Battery  The battery management system determines that the battery is at a low state of charge. Switch the ignition off as soon as possible to protect the battery. This message clears once you start the vehicle and the battery state of charge has recovered. Turning off unnecessary electrical loads allows faster battery state-of-charge recovery. 

Blind Spot Information and Cross Traffic Alert System

Message  Action 
Blindspot System Fault  A fault with the system has occurred. Contact an authorized dealer as soon as possible.  
Blindspot Not Available Sensor Blocked See Manual  The system sensors are blocked. Contact an authorized dealer as soon as possible.   See  Blind Spot Information System.   
Vehicle Coming From X  The system detects a vehicle.   See  Blind Spot Information System.   
Cross Traffic Not Available Sensor Blocked  The blind spot information system and cross traffic alert system sensors are blocked.See  Blind Spot Information System.   
Cross Traffic System Fault  A fault with the system has occurred. Contact an authorized dealer as soon as possible.  

Brake System

Message  Action 
Brake Fluid Level LOW  The brake fluid level is low. Check the brake system immediately.   See  Brake Fluid Check.   
Check Brake System  The brake system needs servicing. Stop the vehicle in a safe place. Contact an authorized dealer. 
Park Brake Engaged  The parking brake is set, the engine is running and you drive your vehicle more than 3 mph (5 km/h). If the warning stays on after you release the parking brake, contact an authorized dealer as soon as possible. 

Doors and Locks

Message  Action 
Driver Door Ajar  The driver door is not completely closed. 
Passenger Door Ajar  The passenger door is not completely closed. 
Rear Left Door Ajar  The rear left door is not completely closed. 
Rear Right Door Ajar  The rear right door is not completely closed. 
Liftgate Ajar  The liftgate is not completely closed. 
Hood Ajar  The hood is not completely closed. 
Switches Inhibited Security Mode  The system has disabled the door switches. 
Factory Keypad Code XXXXX  The factory keypad code displays in the information display after the system resets the keypad.   See  Passive Anti-Theft System.   

Driver Alert

Message  Action 
Driver Alert Warning Rest Now  Stop and rest as soon as it is safe to do so. 
Driver Alert Warning Rest Suggested  Take a rest soon. 

Electronic Stability Control

Message  Action 
ESC Service required  The system detects a malfunction due to a blocked sensor. 
ESC Off  Displays the traction control system status. 
ESC On  Displays the traction control system status. 

Engine

Message  Action 
High Engine Temperature Stop Safely  Displays when the engine temperature is too high.Stop your vehicle in a safe place and allow the engine to cool.If the problem persists, contact an authorized dealer.See  Engine Coolant Check.   
Engine Fault Service Now  Engine service is required. Contact an authorized dealer. 
Engine Oil Level Low Check Level  Check the engine oil level.   See  Engine Oil Check.   

Fuel

Message  Action 
Fuel Level LOW  An early reminder of a low fuel condition. 
Check Fuel Fill Inlet  The fuel fill inlet may not be properly closed. 

Hill Descent Control

Message  Action 
Hill Descent Control OFF  Displays when you deactivate hill descent control mode. 
For Hill Descent Reduce Speed  Displays when hill descent speed exceeds 20 mph (32 km/h). 
For Hill Descent Select Gear  Displays when hill descent control mode requires you to shift the transmission into gear. 
Hill Descent Driver Resume Control  Displays when the hill control mode requires you to resume control. 
Hill Descent Control Fault  Displays when a hill descent system fault is present. 
Hill Descent Control Off System Cooling  Displays when you disable the hill descent control mode to cool the brake system. 
Hill Descent Control Ready  Displays when you activate the hill descent control mode. 

Hill Start Assist

Message  Action 
Hill Start Assist Not Available  Hill start assist is not available. Contact an authorized dealer.   See  Hill Start Assist.   

Keys and Intelligent Access

Message  Action 
To START Press Brake  A reminder to press the brake while starting your vehicle. 
No Key Detected  The system does not detect the key.See Keyless Starting.   
Restart Now or Key is Needed  When you press the Start Stop button to shut off the engine, the system does not detect an Intelligent Access key inside your vehicle. 
Full Accessory Power Active  Your vehicle is in the run ignition state. 
Starting System Fault  There is a problem with your vehicle’s starting system. Contact an authorized dealer for service. 
Key Program Successful  You have successfully programmed an intelligent access key to the system. 
Key Program Failure  You have failed to program an intelligent access key to the system. 
Max Number of Keys Learned  You have programmed the maximum number of keys to the system. 
Not Enough Keys Learned  You have not programmed enough keys to the system. 
Key Battery Low Replace Soon  The key battery is low. Change the battery as soon as possible.   See  Remote Control.   
Engine ON  Informs you that you are exiting your vehicle with the intelligent access key and the engine is on. 

Lane Keeping System

Message  Action 
Lane Keeping Sys. Malfunction Service Required  The system has malfunctioned. Contact an authorized dealer as soon as possible. 
Front Camera Temporarily Not Available  The system has detected a condition that has caused the system to be temporarily unavailable. 
Front Camera Low Visibility Clean Screen  The system has detected a condition that requires a clean windshield to operate properly. 
Front Camera Malfunction Service Required  The system has malfunctioned. Contact an authorized dealer as soon as possible. 
Keep Hands on Steering Wheel  The system requests the driver to keep their hands on the steering wheel. 

Maintenance

Message  Action 
LOW Engine Oil Pressure  Stop your vehicle as soon as safely possible. Switch off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact an authorized dealer as soon as possible. 
Change Engine Oil Soon  The engine oil life remaining is 10% or less. 
Oil Change Required  The oil life left reaches 0%. 
Engine Coolant Overtemperature  The engine coolant temperature is excessively high. 
Washer Fluid Level Low  The washer fluid is low and needs refilling. 
Transport Mode Contact Dealer  Indicates that your vehicle is still in Transport mode. This may not allow some features to operate properly. Contact an authorized dealer. 
Factory Mode Contact Dealer  Indicates that your vehicle is still in Factory mode. This may not allow some features to operate properly. Contact an authorized dealer. 

MyKey

Message  Action 
MyKey Not Created  You cannot program a MyKey during key programming. 
MyKey Active Drive Safely  MyKey is active. 
Speed Limited to XX MPH/km/h  When starting your vehicle, a MyKey is in use and the MyKey speed limit is on. 
Vehicle Near Top Speed  When a MyKey is in use, the MyKey speed limit is on and your vehicle speed is approaching 80 mph (130 km/h). 
Check Speed Drive Safely   MyKey is active. 
Buckle Up to Unmute Audio  A MyKey is in use and Belt-Minder is active. 
Could Not Program Integrated Key  You attempted to program a spare key using two existing MyKeys. 

Park Aid

Message  Action 
Check Park Aid  The system has detected a condition that requires service. Contact an authorized dealer.   See  Principle of Operation.   
Check Rear Park Aid  The system has detected a condition that requires service. Contact an authorized dealer.   See  Rear Parking Aid.   
Front Park Aid On Off  Displays the park aid status. 
Rear Park Aid On Off  Displays the park aid status. 

Park Brake

Message  Action 
Park Brake Engaged  You have set the parking brake and you have driven the vehicle more than 3 mph (5 km/h). If the warning stays on after you have released the parking brake, contact an authorized dealer. 

Power Steering

Message  Action 
Steering Malfunction Service Now  The power steering system has detected a condition that requires service. Contact an authorized dealer. 
Service Power Steering Now  The power steering system is not working.Stop your vehicle at a safe place.Contact an authorized dealer. 
Steering Assist Fault   The power steering system has detected a condition within the power steering system, or passive entry or passive start system requires service. Contact an authorized dealer. 
Steering column lock: Remove and re-insert key while turning wheel to unlock  You need to turn the steering wheel in order to disengage the steering lock. 

Pre-Collision Assist

Message  Action 
Pre-Collision Warning Malfunction  A fault with the system has occurred. Contact an authorized dealer. 
Pre-Collision Warning Not Available Sensor Blocked See Manual  You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor. You can typically clean the sensor to resolve.   See  Pre-Collision Assist.   
Pre-Collision Warning Not Available  A fault with the system has occurred. Contact an authorized dealer. 

Remote Start

Message  Action 
To Drive: Press Brake and Gear Shift Button  A reminder to apply the brake and push the gearshift button to drive your vehicle after a remote start. 

Seats

Message  Action 
Occupant Sensor BLOCKED Remove Objects Near Passenger Seat  Objects are by the passenger seat. After you move the objects away from the seat, if the warning stays on or continues to come on, contact an authorized dealer as soon as possible. 
Memory Recall Not Permitted While Driving  A reminder that memory seats are not available while driving. 
Memory X Saved  Shows where you have saved your memory setting. 

Starting System

Message  Action 
To START Press Brake  A reminder to apply the brake when starting your vehicle. 
Cranking Time Exceeded  The starter has exceeded its cranking time in attempting to start your vehicle. 
Engine Start Pending Please Wait  The starter is attempting to start your vehicle. 
Pending Start Cancelled  The system has cancelled the pending start. 

Tire Pressure Monitoring System

Message  Action 
LOW Tire Pressure  One or more tires on your vehicle have low tire pressure.See  Tire Pressure Monitoring System.   
Tire Pressure Monitor Fault  The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to come on, contact an authorized dealer.  See  Tire Pressure Monitoring System.   
Tire Pressure Sensor Fault  A tire pressure sensor is malfunctioning, or your spare tire is in use. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible.   See  Tire Pressure Monitoring System.   

Terrain Management System

Message  Action 
Normal Mode Active  Displays terrain management normal mode is currently active. 
Snow, Gravel, Grass Mode Active  Displays terrain management snow, gravel, grass mode is currently active. 
Mud, Rut Mode Active  Displays terrain management mud, ruts mode is currently active. 
Sand Mode Active  Displays terrain management sand mode is currently active. 
Terrain Management System Fault  Displays when the terrain management system detects an error. 
Mode Change Not Accepted, Retry  Displayed when terrain management mode cannot be changed at the time of your request. 

Traction Control

Message  Action 
Traction Control Off  Displays the status of the traction control system.   See  Using Traction Control.   
Traction Control On  Displays the status of the traction control system.   See  Using Traction Control.   

Trailer

Message  Action 
Trailer Sway Reduce Speed  Displays when the trailer sway control has detected a trailer sway.   See  Trailer Sway Control.   

Transmission

Message  Action 
Transmission Malfunction Service Now  Contact an authorized dealer. 
Transmission Overtemperature Stop Safely  The transmission is overheating and needs to cool.Stop in a safe place as soon as possible. 
Transmission Overheating Stop Safely  The transmission is overheating and needs to cool.Stop in a safe place as soon as possible. 
Transmission Service Required  Contact an authorized dealer. 
Transmission Too Hot Press Brake  The transmission is getting hot. Stop to let it cool. 
Transmission Limited Function See Manual  The transmission has overheated and has limited functionality. 
Transmission Warming Up Please Wait  The transmission is too cold. Wait for it to warm up before you drive. 
Transmission Not in Park  A reminder to shift into park. 
Press Brake Pedal  A request for you to apply the brake as needed by the transmission. 
Transmission Adjusted  The transmission has adjusted the shift strategy. 
Transmission AdaptMode  The transmission is adjusting the shift strategy. 
Transmission IndicatMode Lockup On  The transmission is locked and unable to select gears. 
Transmission IndicatMode Lockup Off  The transmission is unlocked and free to select gears.