WARNING:  Fully adjust the head restraint before you sit in or operate your vehicle. This will help minimize the risk of neck injury in the event of a crash. Do not adjust the head restraint when your vehicle is moving.
  WARNING:  The head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied. Failure to adjust the head restraint properly could reduce its effectiveness during certain impacts.

Note:  Adjust the seatback to an upright driving position before adjusting the head restraint. Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable. If you are extremely tall, adjust the head restraint to its highest position.
Front seat head restraints
Missing Image
Second-row center seat head restraint (If equipped)
Missing Image
The head restraints consist of:
AAn energy absorbing head restraint.
BTwo steel stems.
CGuide sleeve adjust and release button.
DGuide sleeve unlock and remove button.
Adjusting the Head Restraint
Raising the Head Restraint
Pull the head restraint up.
Lowering the Head Restraint
  1. Press and hold button C.
  2. Push the head restraint down.
Removing the Head Restraint
  1. Pull the head restraint up until it reaches its highest position.
  2. Press and hold buttons C and D.
  3. Pull the head restraint up.
Installing the Head Restraint
Align the steel stems into the guide sleeves and push the head restraint down until it locks.
Second-row outboard seat head restraints
Missing Image
The head restraints consist of:
AAn energy absorbing head restraint.
BTwo steel stems.
CGuide sleeve unlock and remove button.
DFold button.
Folding the Head Restraint
  1. Press and hold button D.
  1. Pull the head restraint back up to reset.
Removing the Head Restraint
  1. Fold the head restraint.
  1. Press and hold both C buttons.
  1. Pull the head restraint up.
Installing the Head Restraint
Align the steel stems into the guide sleeves and push the head restraint down until it locks.
Third-row head restraints
Missing Image
The head restraints consist of:
AAn energy absorbing head restraint.
BTwo steel stems.
CFold strap.
Folding the Head Restraint
Pull the fold strap (C). Pull the head restraint back up to reset.
Note:  Press the stow or fold button on the power folding seats to automatically fold the head restraint.
Tilting Head Restraints
The front head restraints tilt for extra comfort. To tilt the head restraint, do the following:
Missing Image
  1. Adjust the seatback to an upright driving or riding position.
  1. Pivot the head restraint forward toward your head to the desired position.
After the head restraint reaches the forward-most tilt position, pivoting it forward again will then release it to the rearward, un-tilted position.