PRINCIPLE OF OPERATION
You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility to drive with due care and attention. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.|
The system may not function if the sensor is blocked.
Take regular rest breaks if you feel tired. Do not wait for the system to warn you.
Certain driving styles may result in the system warning you even if you are not feeling tired.
In cold and severe weather conditions the system may not function. Rain, snow and spray can all limit sensor performance.
The system will not operate if the sensor cannot track the road lane markings.
If damage occurs in the immediate area surrounding the sensor, have your vehicle checked as soon as possible.
The system may not correctly operate if your vehicle is fitted with a suspension kit not approved by us.
Keep the windshield free from obstructions. For example, bird droppings, insects and snow or ice.
If the camera is blocked or if the windshield is damaged, the system may not function.
The system remembers the on or off setting in the information display menu through ignition cycles.
If enabled in the menu, the system activates at speeds above
40 mph (64 km/h). When below the activation speed, the information display informs the driver that the system is unavailable.
The system automatically monitors your driving behavior using various inputs including the front camera sensor.
If the system detects that your reduced driving alertness is below a certain threshold, the system alerts you using a tone and a message in the cluster display.
USING DRIVER ALERT
Switching the System On and Off
When active, the system monitors your alertness level based upon your driving behavior in relation to the lane markings, and other factors.
The system does not issue warnings below approximately
40 mph (64 km/h).
If you receive a warning you should consider resting, even if the current assessment is within the typical range.
The warning system has two stages. At first, the system issues a temporary warning that you need to take a rest. This message only appears for a short time. If the system detects further reduction in driving alertness, it may issue another warning that remains in the information display for a longer time. You can press OK on the steering wheel control to clear the warning.
Resetting the System
You can reset the system by either:
- Switching the ignition off and on.
- Stopping the vehicle and then opening and closing the driver’s door.