WARNING:  Switch the lamps and the ignition off. Failure to do so could result in serious personal injury.
  WARNING:  Bulbs become hot when in use. Let them cool down before you remove them.

Use the correct specification bulb.   See  Bulb Specification Chart.  Install in the reverse order unless otherwise stated.
Headlamp
Missing Image
AHeadlamp high beam.
BFront direction indicator.
Front Direction Indicator
Missing Image
  1. Switch all of the lamps and the ignition off.
  1. Disconnect the electrical connector.
  1. Turn the bulb holder counterclockwise and remove it.
  1. Remove the bulb by pulling it straight out.
Headlamp High Beam
Missing Image
  1. Switch all of the lamps and the ignition off.
  1. Carefully remove the cover.
  1. Disconnect the electrical connector.
  1. Turn the bulb holder counterclockwise and remove it.
Note:  You cannot separate the bulb from the bulb holder.
Note:  Do not touch the bulb glass.
Rear Direction Indicator and Reversing Lamp
Missing Image
  1. Switch all of the lamps and the ignition off.
  1. Use a suitable tool, for example a screwdriver, to carefully remove the screw covers.
  1. Remove the retaining bolts from the lamp assembly.
  1. Gently pull the lamp assembly away from the vehicle.
Missing Image
  1. Release the wire from the securing clip.
  1. Turn the bulb holder counterclockwise and remove it.
  1. Remove the bulb by pulling it straight out.
LED Lamps
LED lamps are not serviceable items.See an authorized dealer if they fail.
The following lamps are LED:
  • Front fog lamps
  • Front side marker lamps.
  • Front signature lamps.
  • Daytime running lamps.
  • Headlamp low beam.
  • Side direction indicator.
  • Rear side marker lamp.
  • Brake and rear lamp.
  • Central high mounted brake lamp.
License Plate Lamp
Missing Image
  1. Use a suitable tool, for example a screwdriver, to carefully remove the lamp.
  1. Turn the bulb holder counterclockwise and remove it.
  1. Remove the bulb by pulling it straight out.