WARNING   WARNING:  Do not leave children unattended in your vehicle and do not let them play with the power windows. Failure to follow this instruction could result in personal injury.
WARNING   WARNING:  When closing the power windows, verify they are free of obstruction and make sure that children and pets are not in the proximity of the window openings.

Missing Image   Press the control to open the window. Lift the control to close the window.
To reduce wind noise or pulsing noise when just one window is open, slightly open the opposite window.
One-Touch Open
Fully press the control and release it. Press again or lift it to stop the window.
One-Touch Close
Fully lift the control and release it. Press again or lift it to stop the window.
Rear Window Lock
Missing Image   Press the control to lock or unlock the rear window controls. It illuminates when you lock the rear window controls.
Bounce-Back
The window stops and reverses if it detects an obstruction.
Overriding Bounce-Back
WARNING   WARNING:  If you override bounce-back, the window does not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury or damage to your vehicle.

Proceed as follows to override this protection feature when there is a resistance, for example in winter:
  1. Close the window twice until it reaches the point of resistance and let it reverse.
  1. Close the window a third time to the point of resistance.You disabled the bounce-back feature and you can now close the window manually.The window goes past the point of resistance and you can fully close it.
Note:   If the window does not close, have your vehicle checked as soon as possible.
Resetting Bounce-Back
WARNING   WARNING:  Bounce-back is off until you reset the memory. Take care when closing the windows to avoid personal injury or damage to your vehicle.

If you have disconnected the battery, you must reset the bounce-back memory separately for each window.
  1. Lift and hold the switch until the window is fully closed.
  1. Release the switch.
  1. Lift and hold the switch again for a few seconds.
  1. Release the switch.
  1. Lift and hold the switch again for a few seconds.
  1. Release the switch.
  1. Press and hold the switch until the window is fully open.
  1. Lift and hold the switch until the window is fully closed.
  1. Release the switch.
  1. Open the window and then try to close it using one-touch close.
Note:   Repeat the procedure if the window does not close when you use one-touch.
Accessory Delay
You can use the window controls for several minutes after switching off the ignition or until opening either front door.