This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Remote Control
Note:
In temperatures above
15 °C (59 °F), the interior fan may turn on when you press a button on the remote control in order to ventilate your vehicle.
Reprogramming the Unlocking Function
Note:
When you press the unlock button either all the doors are unlocked or only the driver’s door and the liftgate are unlocked.Pressing the unlock button again unlocks all the doors.
Press and hold the unlock and lock buttons on the remote control simultaneously for at least four seconds with the ignition off.The direction indicators will flash twice to confirm the change.
To return to the original unlocking function, repeat the process.
Changing the Remote Control Battery
Make sure that you dispose of old batteries in an environmentally friendly way.Seek advice from your local authority regarding recycling. |
Remote Control with a Folding Key Blade
- Slide the release slider in the direction of the arrow.
- Remove the key blade.
- Twist the screwdriver in the position shown to separate the two halves of the remote control.
- Carefully prise out the battery with the screwdriver.
Note:
Do not touch the battery contacts or the printed circuit board with the screwdriver.
- Install a new battery (3V CR 2032) with the + facing downwards.
- Assemble the two halves of the remote control.
- Install the key blade.
Remote Control without a Folding Key Blade
- Press and hold the buttons on the edges to release the cover.Carefully remove the cover.
- Remove the key blade.
- Twist the screwdriver in the position shown to start separating the two halves of the remote control.
- Twist the screwdriver in the position shown to separate the two halves of the remote control.
Note:
Do not touch the battery contacts or the printed circuit board with the screwdriver.
- Carefully prise out the battery with the screwdriver.
- Install a new battery (3V CR 2032) with the + facing downwards.
- Assemble the two halves of the remote control.
- Install the key blade.