This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Using Cruise Control (If Equipped)
Press the button when the system is in standby mode. The system also turns off when you switch the ignition off.
Press one of the buttons to set the current speed.
Press the button, or press the brake pedal to cancel the set speed.
WARNING:
Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
WARNING:
When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes. |
The cruise controls are on the steering wheel.
Switching Cruise Control On
|
Press the button. |
Switching Cruise Control Off
Press the button when the system is in standby mode. The system also turns off when you switch the ignition off.Note:
The set speed erases when you switch the system off.
Setting the Cruise Speed
Drive to the required speed.
Press one of the buttons to set the current speed.Take your foot off the accelerator pedal.
Note:
The indicator changes color.
Changing the Set Speed
|
Press the button to increase the set speed. |
Press the button to decrease the set speed. |
You can adjust the set speed in small or large increments. Press either of the buttons once to adjust the set speed in small increments. Press and hold either of the buttons to adjust the set speed in large increments.
Note:
If you accelerate by pressing the accelerator pedal, the set speed does not change.When you release the accelerator pedal, your vehicle returns to the speed that you previously set.
Canceling the Set Speed
Press the button, or press the brake pedal to cancel the set speed.Note:
The set speed is stored.
Note:
The system cancels if the vehicle speed drops below
16 km/h (10 mph) under the set speed when driving uphill.
Resuming the Set Speed
Press the button to resume the set speed. |
Cruise Control Indicator
|
It illuminates when you switch the system on. |
Thank You For Your Feedback