Power Exterior Mirrors
Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death.|
To adjust a mirror:
- Select the mirror you want to adjust. The control will light.
- Adjust the position of the mirror.
- Press the mirror control again.
Fold-Away Exterior Mirrors
Push the mirror toward the door window glass. Make sure that you fully engage the mirror in its support when returning it to its original position.
Auto-Folding Mirrors (If Equipped)
The exterior mirrors automatically fold in toward the glass after you place the transmission into park (P), turn off the vehicle, open and close the driver's side door and lock the vehicle. The exterior mirrors automatically unfold and return to their driving position after you unlock the vehicle and open and close the driver's side door.
You can switch this feature on and off through the information display. See
If you switch this feature off through the information display, the welcome lighting also switches off.
You can fold the mirrors on demand by pressing the power-folding mirror control located on the door.The control lights and the mirrors fold in toward the glass. Press the control again to unfold the mirrors.The control light turns off.
If you use the power-folding control to fold the mirrors on demand and the auto fold feature is switched on, the auto-folding feature will become disabled. To re-enable the auto-folding feature, press the control again to unfold the mirrors.
If your auto-folding mirrors are manually folded or unfolded, they may not work properly even after you re-position them. You need to reset them if:
- The mirrors vibrate when you drive.
- The mirrors feel loose.
- The mirrors do not stay in the folded or unfolded position.
- One of the mirrors is not in its normal driving position.
To reset the auto-fold feature, use the power-folding mirror control to fold and unfold the mirrors. You may hear a loud noise as you reset the mirrors. This sound is normal. Repeat this process as needed each time the mirrors are manually folded or unfolded.
Heated Exterior Mirrors
Memory Mirrors (If Equipped)
You can save and recall the mirror positions through the memory function. See
Signal Indicator Mirrors
The outer portion of the appropriate mirror housing will blink when you switch on the turn signal.
Auto-Dimming Feature (If Equipped)
The driver’s exterior mirror automatically dims when the interior auto-dimming mirror turns on.
Lincoln Welcome Mat
Projection lights, on the bottom of the mirror housings, project an image onto the ground a short distance from the vehicle. See
Integrated Blind Spot Mirrors (If Equipped)
Objects in the mirror are closer than they appear.|
The blind spot mirror has a wide-angle mirror inside the exterior mirror that can increase visibility along the side of your vehicle.
Check the main mirror first before a lane change, then check the blind spot mirror. If no vehicles are present in the blind spot mirror and the traffic in the adjacent lane is at a safe distance, signal that you intend to change lanes. Glance over your shoulder to verify traffic is clear and carefully change lanes.
The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A). The image will transition from the main mirror and begin to appear in the blind spot mirror as the vehicle approaches (B). The vehicle will transition to your peripheral field of view as it leaves the blind spot mirror (C).
Blind Spot Monitor (If Equipped)