Power Exterior Mirrors
WARNING:
Do not adjust the mirrors when your vehicle is moving. |

A Left-hand mirror. B Adjustment control. C Right-hand mirror.
|
To adjust your mirrors, switch your vehicle on (with the ignition in accessory mode or the engine running) and then:
- Select the mirror you want to adjust. The control lights.
- Use the adjustment control to adjust the position of the mirror.
- Press the mirror control again. The control light turns off.
Fold-Away Exterior Mirrors
Push the mirror toward the door window glass. Make sure that you fully engage the mirror in its support when returning it to its original position.
Heated Exterior Mirrors (If Equipped)
Memory Mirrors (If Equipped)
You can save and recall the mirror positions through the memory function. See
Memory Function.
Auto-dimming Feature (If Equipped)
The driver exterior mirror automatically dims when the interior auto-dimming mirror turns on.
Direction Indicator Mirrors (If Equipped)
While the vehicle is running, the forward-facing portion of the appropriate mirror housing blinks when you switch on the direction indicator.
Puddle Lamps (If Equipped)
The lamps on the bottom part of the mirror housing light when you use your transmitter to unlock the doors or when you open a door.
Integrated Blind Spot Mirror (If Equipped)
WARNING:
Objects in the blind spot mirror are closer than they appear. |
Blind spot mirrors have an integrated convex mirror built into the upper outboard corner of the exterior mirrors. They can assist you by increasing visibility along the side of your vehicle.
Check the main mirror first before a lane change, then check the blind spot mirror. If no vehicles are present in the blind spot mirror and the traffic in the adjacent lane is at a safe distance, signal that you are going to change lanes. Glance over your shoulder to verify traffic is clear, and carefully change lanes.

The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A). The image transitions from the main mirror and begins to appear in the blind spot mirror as the vehicle approaches (B). The vehicle transitions to your peripheral field of view as it leaves the blind spot mirror (C).
Blind Spot Information System (If Equipped)