Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves.|
When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
You may hear a pulsing noise when just one of the windows is open. Lower the opposite window slightly to reduce this noise.
Press the control to open the window.
Lift the control to close the window.
Press the control fully and release it. Press again or lift it to stop the window.
Lift the control fully and release it. Press again or lift it to stop the window.
Resetting One-Touch Up
- Lift and hold the control until the window is fully closed.
- Release the control.
- Open the window and then try to close it automatically.
- Repeat the procedure if the window does not close automatically.
The one-touch down and one-touch up feature only applies to the front windows.
The window will automatically stop and reverse some distance if it detects an obstacle while closing.
Overriding the Bounce-Back Feature
When you override the bounce-back feature the window will not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury or damage to your vehicle.|
Pull up the window switch and hold within two seconds of the window reaching the bounce-back position. The window travels up with no bounce-back protection. The window stops if you release the switch before the window is fully closed.
Press the control to lock or unlock the rear window controls. It illuminates when you lock the rear window controls.
The window switches remain operational for several minutes when you switch the ignition off or until you open either front door.