WARNING   WARNING:  Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
WARNING   WARNING:  When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes.

To help the system to maintain the set speed when going downhill, downshift to a lower gear.
Your vehicle speed could decrease below the set speed when driving uphill.
Note:   The system cancels if your vehicle speed drops below 10 mph (16 km/h) under the set speed when driving uphill.
Missing Image
The cruise controls are on the steering wheel.   See   Cruise Control
Switching Cruise Control On
Missing Image  For vehicles without Speed Limiter, press and release the button.Missing Image  For vehicles with Speed Limiter, press and release the button.
The indicator displays in the instrument cluster.
Setting the Cruise Speed
Drive to your preferred speed.
Missing Image  Press and release to set the current speed.Missing Image  Press and release to set the current speed.
Take your foot off the accelerator pedal.
Note:   The indicator changes color.
Changing the Set Speed
Missing Image  Press and release to increase the set speed in small increments. Missing Image  Press and release to decrease the set speed in small increments.
Press and hold either button to accelerate or decelerate, respectively. Release the button when you reach your preferred speed.
Press the accelerator or brake pedal until you reach your preferred speed. Press either button.
Note:   If you accelerate by pressing only the accelerator pedal, the set speed does not change. When you release the accelerator pedal, your vehicle returns to the speed you previously set.
Canceling the Set Speed
Missing Image  Press and release the button, or tap the brake pedal to cancel the set speed.
Note:   The system remembers the set speed.
Resuming the Set Speed
Missing Image  Press and release to resume the set speed.
Switching Cruise Control Off
Missing Image  For vehicles without Speed Limiter, press and release the button when the system is in standby mode or switch the ignition off.Missing Image  For vehicles with Speed Limiter, press and release the button when the system is in standby mode or switch the ignition off.
Note:   You erase the set speed when you switch the system off.