This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Electric Parking Brake
Pull the switch up and hold it.
WARNING:
Apply the parking brake and shift into park (P) before leaving your vehicle.
WARNING:
If you drive extended distances with the parking brake applied, you could cause damage to the brake system.
WARNING:
The electric parking brake does not operate if the vehicle battery has run out of charge. |
Your vehicle has an electric parking brake. You operate it with a switch instead of a lever. The switch is on the center console or to the left-hand side of the steering wheel, on the lower part of the instrument panel.
Note:
The electric parking brake makes noises during operation. This is normal.
Applying the Electric Parking Brake
|
Pull the switch up. | 
The red warning lamp flashes during operation and illuminates when the parking brake is applied. |
|
Note:
It remains illuminated for a short period of time after you switch the ignition off.
If it continues to flash or does not illuminate, the system has malfunctioned. Have your vehicle checked as soon as possible.
Note:
You can apply the electric parking brake when the ignition is off.
Note:
If you shift your vehicle into park (P) on a slope and the transmission cannot securely hold the vehicle, the electric parking brake automatically applies. See
Roadside Emergencies.
Applying the Electric Parking Brake in an Emergency
Note:
Do not apply the electric parking brake when your vehicle is moving, except in an emergency. If you repeatedly use the electric parking brake to slow or stop your vehicle, you could cause damage to the brake system.
You can use the electric parking brake to slow or stop your vehicle in an emergency.
|
Pull the switch up and hold it. |
The red warning lamp illuminates, a tone sounds and the stoplamps turn on. |
|
|
The electric parking brake continues to slow your vehicle down unless you release the switch.
Manually Releasing the Electric Parking Brake
Switch the ignition on.
Press and hold the brake pedal.
|
Push the switch down. |
The red warning lamp turns off. |
|
|
If it remains illuminated or flashes, the system has malfunctioned. Have your vehicle checked as soon as possible.
Pulling Away on a Hill When Towing a Trailer
Press and hold the brake pedal.
Pull the switch up and hold it.Shift into gear.
Press the accelerator pedal until the engine has developed sufficient torque to prevent your vehicle from rolling down the hill.
|
Release the switch and pull away in a normal manner. |
Automatically Releasing the Electric Parking Brake
Close the driver door.
Shift into gear.
Press the accelerator pedal and pull away in a normal manner.
|
The red warning lamp turns off. |
|
If it remains illuminated or flashes, the electric parking brake has not released. Manually release the parking brake.
Releasing the Electric Parking Brake if the Vehicle Battery is Running Out of Charge
Connect a booster battery to the vehicle battery to release the electric parking brake if the vehicle battery is running out of charge. See
Jump Starting the Vehicle.