Note:   Occasional brake noise is normal.If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out and an authorized dealer should check them.If the vehicle has continuous vibration or shudder in the steering wheel while braking, an authorized dealer should check your vehicle.
Note:   Brake dust may accumulate on the wheels, even under normal driving conditions.Some dust is inevitable as the brakes wear and does not contribute to brake noise.See   Cleaning the Wheels
 Wet brakes result in reduced braking efficiency. Gently press the brake pedal a few times when driving from a car wash or standing water to dry the brakes.
Brake Over Accelerator
In the event the accelerator pedal becomes stuck or entrapped, apply steady and firm pressure to the brake pedal to slow the vehicle and reduce engine power. If you experience this condition, apply the brakes and bring your vehicle to a safe stop.Move the transmission to park (P), switch the engine off and apply the parking brake. Inspect the accelerator pedal for any interference. If none are found and the condition persists, have your vehicle towed to the nearest authorized dealer.
Emergency Brake Assist
Emergency brake assist detects when you brake heavily by measuring the rate at which you press the brake pedal. It provides maximum braking efficiency as long as you press the pedal.Emergency brake assist can reduce stopping distances in critical situations.
Note:   Depending on applicable laws and regulations in the country for which your vehicle was originally built, your brake lamps could flash during heavy braking. Following this, your hazard lights may also flash when your vehicle comes to a stop.
Anti-lock Brake System
This system helps you maintain steering control during emergency stops by keeping the brakes from locking.
Missing Image  This lamp momentarily illuminates when you switch the ignition on.If the light does not illuminate during start up, remains on or flashes, the anti-lock braking system may be disabled.Have the system checked by an authorized dealer.If the anti-lock brake system is disabled, normal braking is still effective.
Note:   Indicators vary depending on region.
Missing Image  Missing Image  This lamp also illuminates momentarily when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked by an authorized dealer. If the brake warning lamp illuminates with the parking brake released, have the system checked immediately.