![]() | |
TSB 12-5-11 |
|
Publication Date: May 22, 2012 |
FORD: | 2011-2012 Explorer |
Some 2011-2012 Explorer vehicles built on or before 2/5/2012 may exhibit an intermittent Air Bag Warning Indicator with diagnostic trouble codes (DTCs) B1212 and/or B1213.
Follow the Service Procedure steps to correct the condition.
PART NUMBER | PART NAME |
---|---|
XG-12 | Motorcraft® Electrical Grease |
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
OPERATION | DESCRIPTION | TIME |
---|---|---|
120511A | 2011-2012 Explorer: Apply Grease To Connectors Following The Service Procedure (Do Not Use With Any Other Labor Operations) | 1.4 Hrs. |
BASIC PART NO. | CONDITION CODE |
---|---|
14401 | x2 |
NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by "do-it-yourselfers". Do not assume that a condition described affects your car or truck. Contact a Ford or Lincoln dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right to supercede this information with updates. The most recent information is available through Ford Motor Company's on-line technical resources.
Copyright © 2012 Ford Motor Company