Note:   Occasional brake noise is normal.If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out.Have the system checked as soon as possible.If the vehicle has continuous vibration or shudder in the steering wheel while braking, have the system checked as soon as possible.
All standard equipment brakes are self-adjusting. Automatic adjustment, when required, occurs whenever you apply and release the brakes during forward or reverse operation.
Know the required stopping distances for all driving conditions you may encounter. For longer brake lining life, take full advantage of engine braking power when coming to a stop.
 Wet brakes result in reduced braking efficiency. Gently press the brake pedal a few times when driving from a car wash or standing water to dry the brakes.
If the brakes do not grip well:
  • Check brake adjustment.
  • Check the brake linings for excessive wear.
  • Check the system air pressure on vehicles with air brakes.
  • Let the brakes cool if you have been using them excessively, as in mountain driving or after several fast, high-speed stops.
  • If you have been driving through deep water, gently apply the brakes several times while your vehicle is moving slowly.
Brake Over Accelerator
In the event the accelerator pedal becomes stuck or entrapped, apply steady and firm pressure to the brake pedal to slow the vehicle and reduce engine power. If you experience this condition, apply the brakes and bring your vehicle to a safe stop.Move the transmission to park (P), switch the engine off and apply the parking brake.Inspect the accelerator pedal for any interference.If none are found and the condition persists, have your vehicle towed to the nearest authorized dealer
Anti-lock Brake System
This system helps you maintain steering control during emergency stops by keeping the brakes from locking.
Antilock Braking System Warning Lamp  If the light does not illuminate during start up, remains on or flashes, the system may be disabled.It also momentarily illuminates when you switch the ignition on to confirm the lamp is functional.If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked.Trailer Anti-lock Brake System  If you connect a PLC trailer with the ignition on, the trailer ABS light also illuminates. If the light fails to illuminate, if it remains on after you start the vehicle or continues to flash, have the system serviced immediately.
See   Warning Lamps and Indicators. 
Parking Brake  If the system is disabled, normal braking is still effective. If the brake warning lamp illuminates with the parking brake released, have the system checked immediately. It also momentarily illuminates when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked.