This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Decommissioning Requirements
We have implemented a decommissioning process of manufacturer-provided police features. It is the responsibility of the owner to complete the decommissioning of the vehicle in compliance with any state regulations prior to initial sale to the public sector.
Vehicle Sealing of Aftermarket Equipment
Removing customized equipment from your vehicle can compromise body panels and seals. Thoroughly inspect your vehicle for any signs where the equipment has been removed, for example, holes and damage to body seals.
Any items that remain on your vehicle must be inspected and any sign of damage immediately repaired. Failure to follow this instruction may result in water and exhaust fumes entering the passenger compartment. See your authorized dealer for more information and direction regarding proper sealing procedures.
Dark Car
Authorized personnel must use a diagnostic scan tool to decommission the dark car feature.
Integrated Computer Screen
Remove the audio video extender (AVX) box from the cargo area and sever the CAT6 cables prior to initial sale to the public sector.
OBD-II Split Connector
Remove the OBD-II split connector cable prior to initial sale to the public sector.
Police Engine Idle
Authorized personnel must use a diagnostic scan tool to decommission the police engine idle feature.
Police Perimeter Alert
Authorized personnel must use a diagnostic scan tool to decommission the police perimeter alert feature.
Pre-Collision Assist Disable
Authorized personnel must use a diagnostic scan tool to decommission the pre-collision assist disable feature.
Rear Cross Traffic Braking Disable
Authorized personnel must use a diagnostic scan tool to decommission the rear cross traffic braking disable feature.
Rear Camera On Demand
Authorized personnel must use a diagnostic scan tool to decommission the rear camera on demand feature.
Rear Door Handles and Locks (If Equipped)
Remove the rear door handle trim covers to allow for inside handle function. If your vehicle has the hidden lock knob on the front edge of the rear door, switch the child locks off.
Ballistic Panel Removal (If Equipped)
Doors with factory installed ballistic panels have a modified front door latch. Upon ballistic panel removal, you will need a new front door latch and remote control assembly.
Headlamp Wig-Wag Feature
Authorized personnel must use a diagnostic scan tool to decommission the headlamp wig-wag feature.