Lane Centering - Lane Centering Automatic Cancellation

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Lane Centering Automatic Cancellation

You must keep your hands on the steering wheel at all times.

When an external condition cancels the system, for example, no lane markings are available and your hands are on the steering wheel, a tone sounds and a message appears in the instrument cluster display.

When an external condition cancels the system, for example, no lane markings are available and your hands are not on the steering wheel, the system immediately alerts you to take control of the vehicle. If this alert is ignored, the system slows the vehicle while maintaining steering control.

If your vehicle starts to slow down, you must contribute to the steering control and press and release the button or briefly press the accelerator pedal to regain full system performance.

Automatic cancellation can also occur if:

The lane becomes too wide or narrow.
The system cannot detect valid lane markings.
Lane markings are crossed.
The curve of the road is too sharp.

Note: The system disables until the next key cycle if your vehicle slows down due to driver inactivity twice within a key cycle.

You initiate a cancellation when the system is active and you switch the turn signal lamp on. The system immediately cancels. The system remains in standby mode as long as the turn signal lamp is engaged. The system automatically re-activates once the vehicle is centered in a lane and the turn signal lamp is switched off.