This chapter describes the phone functions of the Navigation System TravelPilot EX.
Note:   Refer to your Navigation System TravelPilot EX guide for details of the controls.
An active phone must be present.
Even if connected to the Navigation System TravelPilot EX, your phone can still be used in the usual way.
Making a call
Dialling a number - cradle phone
Using the cradle phone allows you to access your mobile phone address book. The entries will appear in the TravelPilot EX display.
  1. Press the PHONE button on the audio unit.
  1. Using the PHONEBOOK option in the menu.
  1. Choose one of the letter areas.
  1. Turning the right rotary entry control, select the desired phone number.
  1. By pressing the INFO button the details of the phonebook entry can be displayed.
  1. Press the right rotary entry control button.
Dialling a number - Bluetooth phone
Using the Bluetooth phone, phone numbers can be dialled using voice control, refer to the Voice control chapter.
Ending a call
Calls can be ended by either:
  • pressing the reject button
  • pressing the MODE button on the remote switch
  • pressing the off button on the navigation system
  • pressing the right rotary entry control button.
Redialling a number - cradle phone
  1. Press the PHONE button on the audio unit.
  1. Press the MENU button.
  1. Select the CALL OUT list, CALL IN list or REDIAL.
  1. Press the PHONE button on the audio unit to dial the desired phone number.
Redialling a number - Bluetooth phone
  1. Press the PHONE button on the audio unit.
  1. Press the MENU button.
  1. Select REDIAL.
  1. Press the PHONE button on the audio unit to dial the phone number.
Handling an incoming call
Accepting an incoming call
Incoming calls can be accepted by either:
  • pressing the accept button
  • pressing the MODE button on the remote control
  • pressing the PHONE button on the audio unit
  • using the ACCEPT option in the menu.
Rejecting an incoming call
Incoming calls can be rejected by either:
  • pressing the reject button
  • pressing one of the following buttons on the audio unit: CD, AM/FM
  • using the REJECT option in the menu.
Note:   You cannot reject an incoming call using the remote control MODE button.
Handling a second incoming call
Note:   The second incoming call function must be activated in your phone.
If there is an incoming call, whilst there is an ongoing call, a beep will be heard and you will have the option to end the active call and to accept the incoming call.
Accepting a second incoming call
Second incoming calls can be accepted by either:
  • Pressing the accept button.
  • Pressing the MODE button on the remote control.
  • Pressing the PHONE button on the audio unit.
  • Using the ACCEPT option in the menu.
Note:   This will cancel the ongoing call.
Rejecting a second incoming call
Second incoming calls can be rejected by pressing either:
  • The teject button
  • one of the following buttons on the audio unit: CD, AM/FM.
Changing the active phone
Note:   Phones must be bonded to the system before they can be made active.
  1. Press the PHONE button on the audio unit.
  1. Using the ACTIVE PHONE option in the menu, select the active phone from the list using the preset buttons.
Debonding a bonded phone
A bonded phone can be deleted from the system at any time, unless a phone call is in progress.
  1. Press the PHONE button on the audio unit.
  1. Select the DEBOND option in the menu.
  1. Select the phone from the list by using the preset buttons.
Note:   After bonding a Bluetooth phone to the system, this becomes the active phone.
However, in some cases the Bluetooth phone has to be activated by pressing the appropriate station button on the audio or navigation unit.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok