At a Glance
Occupant protection
Keys and Remote Controls
Doors and Locks
Engine immobiliser
Steering Wheel
Wipers and Washers
Lighting
Windows and Mirrors
Instrument Cluster
Information Displays
Climate Control
Convenience features
Starting and Stopping the Engine
Fuel and Refuelling
Stability Control
Parking Aids
Load Carrying
Towing
Driving Hints
Status after a collision
Vehicle recovery
Maintenance
- General Information
- Opening and Closing the Bonnet
- Under Bonnet Overview - 1.3L Duratec-8V (Rocam)
- Under Bonnet Overview - 1.25L Duratec-16V (Sigma)/1.4L Duratec-16V (Sigma)/1.6L Duratec-16V (Sigma)
- Under Bonnet Overview - 2.0L Duratec-ST (Zetec)
- Under Bonnet Overview - 1.4L Duratorq-TDCi (DV) Diesel
- Under Bonnet Overview - 1.6L Duratorq-TDCi (DV) Diesel
- Technical Specifications
Vehicle battery
Wheels and Tyres
Telephone
Voice control
Vehicle identification
Capacities and Specifications
Type approvals
Removing a Headlamp
- Open the bonnet. See Opening and Closing the Bonnet.
- Release the clips on top of the radiator grille.
- Remove the radiator grille.
- Release the front bumper from the headlamps.
- Remove the screws.
CAUTION:
Do not pull the bumper more than 10 mm from its original position. |
- Carefully pull the bumper towards the front of the vehicle and remove the screw.
- Disconnect the electrical connector and remove the headlamp.
|
CAUTION:
When fitting the headlamp, take care not to damage the locating points. |
Note:
When fitting the headlamp, make sure that you fully engage the headlamp in the fixing points.
Thank You For Your Feedback