Image Shown Without Description
ASeat adjustment controls
BMemory pre-set buttons
Up to four different driver's seat and exterior mirror positions can be stored in the memory. Your preferred setting for the reverse mirror dipping feature can also be stored.
Setting a memory pre-set
Passive setting
The vehicle stores the seating and mirror positions for up to four remote controls or passive keys. Next time the vehicle is unlocked, the position of the seat and mirrors will adjust to the last used position.
Each time you turn the ignition off, the current seat and mirror settings are stored on the remote control or passive key used.
Active setting
  1. Turn the ignition on.
  1. Adjust the seat and exterior mirrors to the desired position.
  1. Press and hold the desired pre-set button B until a single chime sounds to confirm.
Recalling a stored seat position
Note:   To stop seat movement during a recall, press any driver seat adjustment control, any of the memory buttons or any mirror control switch. Seat movement will also stop if you move the vehicle.
Passive recall
Note:   If more than one passive key is in range, the memory function will move to the settings of the first key stored.
When you unlock the vehicle with the remote control or pull the driver door handle with a passive key in range, the seat and mirrors will move to the position stored on that remote control or passive key.
Active recall
Press the pre-set button associated with the desired driving position. The seat and mirrors will move to the position stored on that pre-set.
Resetting the memory
If any seat position travel is interrupted (e.g. an obstacle in the way or loss of power supply), you will need to reset the memory.
Note:   Make sure all electrical accessories are switched off.
  1. Turn the ignition to position II.
  1. Operate the seat adjustment control to move the seat in the required direction until it stops. A click will be heard.
  1. Release the seat adjustment control and immediately press and hold the switch in the same direction for at least 3 seconds. Keep it held until the seat stops at the mechanical end of its travel and a click is heard.
  1. Release the seat adjustment control.
  1. Operate the same seat adjustment control in the opposite direction for at least 3 seconds. Keep it held until the seat stops at the mechanical end of its travel and a click is heard.