WARNING   WARNING:  Take care when refuelling to avoid spilling any residual fuel from the fuel nozzle.
WARNING   WARNING:  Do not use any kind of flames or heat near the fuel system. The fuel system is under pressure. There is a risk of injury if the fuel system is leaking.

CAUTION   CAUTION:  If you use a high pressure spray to wash your vehicle, only spray the fuel filler flap briefly from a distance not less than 200 millimetres (8 inches).

Image Shown Without Description
  1. Open the flap fully until it engages.
Fuel Nozzle Notch
Note:   When you insert the fuel nozzle, a spring loaded inhibitor will open if the correct size nozzle is detected. This helps to avoid filling up with the wrong fuel.
  1. Insert the fuel nozzle up to and including the first notch on the nozzle A. Keep it resting on the cover of the fuel pipe opening.
WARNING   WARNING:  Stop refuelling after the fuel nozzle stops the second time. Additional fuel will fill the expansion space in the fuel tank which could lead to fuel overflowing. Fuel spillage could be hazardous to other road users.

Fuel Nozzle Position
AIncorrect position
BCorrect position
3. Do not lift the nozzle during refilling. This can affect the flow of fuel and shut off of the fuel nozzle before the fuel tank is full.
Image Shown Without Description
4. Operate the nozzle within the area shown.
WARNING   WARNING:  We recommend that you remove the fuel nozzle slowly to allow any residual fuel to drain into the fuel tank. Alternatively you can wait 10 seconds before removing the fuel nozzle.
WARNING   WARNING:  Do not remove the nozzle from its fully inserted position during the entire refuelling process.

Remove the Fuel Filler Nozzle
5. Slightly raise the fuel nozzle to remove it.
Refuelling with a fuel can
Use the funnel which is located in the glove box.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok