WARNING   WARNING:  The system does not relieve you of your responsibility to regularly check the tyre pressures.
WARNING   WARNING:  The system will only provide a low tyre pressure warning. It will not inflate the tyres.
WARNING   WARNING:  Do not drive on significantly under-inflated tyres. This may cause the tyres to overheat and fail. Under-inflation reduces fuel efficiency, tyre tread life and may also affect your ability to drive the vehicle safely.

CAUTION   CAUTION:  Do not bend or damage the valves when you are inflating the tyres.
CAUTION   CAUTION:  Have tyres installed by properly trained technicians.

The Deflation Detection System will alert you if there is a change of air pressure in any tyre. It does this by using the ABS sensors to detect the rolling circumference of the wheels. When the circumference changes, this indicates low pressure in a tyre, a warning message is displayed in the information display and the message indicator will illuminate.   See   Information Messages. 
Apart from a too low tyre pressure or a damaged tyre, the following situations can affect the rolling circumference:
  • Vehicle load is uneven.
  • When using a trailer or travelling up and down an incline.
  • Using snow chains.
  • Driving on soft surfaces such as snow or mud.
Note:   The system will still function correctly, but there may be an increased detection time.
If a low pressure warning message is displayed in the information display, check the tyre pressures as soon as possible and inflate them to the recommended pressure.   See   Technical Specifications. 
If this happens frequently, have the cause determined and rectified as soon as possible.
System reset
Note:   Do not reset the system when the vehicle is moving.
Note:   You should reset the system following any adjustment to the tyre pressures or any changing of tyres.
Note:   Turn the ignition on.
Type 2 instrument cluster
  1. Using the multifunction lever, navigate to 'SET' > T. Pres.
  1. Press and hold the SET/RESET button until the message Tyre Pressure set appears.
Type 3 instrument cluster
  1. Using the multifunction lever, navigate to hold 'SET' to set Tyre Pres.
  1. Press and hold the SET/RESET button until the message Tyre Pressure set appears.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok