You can use the power door lock control or the remote control to lock and unlock your vehicle.
Power Door Locks
The power door lock control is on the driver and front passenger door panels.
Power Door Lock/Unlock
AUnlock
BLock
Door Lock Indicator
An LED on the instrument panel will light when you lock the doors. It is not a functional control.
Remote Control
Unlocking the Doors (Two-Stage Unlock)
Unlock Icon  Press the button to unlock the driver door.
Press the button again within three seconds to unlock all doors. The turn signals will flash.
Press and hold both the lock and unlock buttons on the remote control for four seconds to disable or enable two-stage unlocking. Disabling two-stage unlocking allows all vehicle doors to unlock with one press of the button. The turn signals will flash twice to indicate a change to the unlocking mode. The unlocking mode applies to the remote control, keyless entry keypad and intelligent access.
Intelligent access at the driver door will unlock all doors when you disable two-stage unlocking.
Locking the Doors
Lock Icon  Press the button to lock all the doors. The turn signals will flash.
Press the button again within three seconds to confirm that all the doors are closed. The doors will lock again, the horn will sound and the turn signals will flash if all the doors and the luggage compartment are closed.
Note:   If locking was not successful or any door or the liftgate is open, or if the hood is open on vehicles with a perimeter alarm or remote start, the horn will sound twice and the lamps will not flash.
Liftgate
WARNING   WARNING:  Make sure all persons are clear of the liftgate area before using the liftgate control.
WARNING   WARNING:  Make sure to close and latch the liftgate to prevent drawing exhaust fumes into your vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate open, keep the vents or windows open so outside air comes into your vehicle. Failure to follow this warning could result in serious personal injury.

Note:   Be careful when opening or closing the liftgate in a garage or other enclosed area to avoid damaging the liftgate.
Liftgate Ajar  Press twice within three seconds to:
  • unlatch a manual liftgate
  • open, close or stop the movement of a power liftgate.   See   Power Liftgate. 
Mechanical Key
Turn the top of the key toward the front of your vehicle once to lock all doors.
Turn the top of the key toward the rear of your vehicle once to unlock the driver door only.
Locking the Doors Individually
If the power locks fail to operate, lock the doors individually using the key in the position shown.
Child Safety Lock
Left-Hand Side
Turn clockwise to lock.
Right-Hand Side
Turn counterclockwise to lock.
Opening a Rear Door from Inside
Pull the interior door release handle twice to unlock and open a rear door. The first pull unlocks the door and the second pull will unlatch the door.
Activating Intelligent Access (If Equipped)
The intelligent access key must be within 3 feet (1 meter) of your vehicle.
At the Front Doors
Pull a front exterior door handle to unlock and open the door. The unlock sensor is on the back of the handle. Make sure not to touch the lock sensor area on the front of the handle.
Door Handle/Passive Lock Button
Touch the lock sensor area for a few seconds to lock your vehicle. To avoid inadvertently unlocking the door, make sure you only touch the lock sensor and no other area of the door handle.
After locking the doors with the lock sensor, there is a brief delay before you can unlock your vehicle. This delay lets you pull the handle to make sure it locked.
Note:   Keep the door handle surface clean to avoid issues with operation.
At the Liftgate
Press the exterior liftgate release button on the top of the liftgate pull-cup handle.
Smart Unlocks For Integrated Keyhead Transmitter
This feature helps to prevent you from locking yourself out of your vehicle if your key is still in the ignition.
When you open one of the front doors and lock your vehicle with the power door lock control, all the doors will lock then unlock if your key is still in the ignition.
You can still lock your vehicle with the key in the ignition by either:
  • using the keyless entry keypad with the driver door closed
  • pressing the lock button on the transmitter even if the doors are not closed.
If both front doors are closed, you can lock your vehicle by any method, regardless of whether the key is in the ignition or not.
Smart Unlocks For Intelligent Access Keys (If Equipped)
This feature helps to prevent you from unintentionally locking your intelligent access key inside your vehicle’s passenger compartment or rear cargo area.
When you lock your vehicle using the power door lock control (with the door open, vehicle in park and ignition off), your vehicle will search for an intelligent access key in the passenger compartment after you close the door. If your vehicle finds a key, all of the doors will immediately unlock.
In order to override the smart unlock feature and intentionally lock the intelligent access key inside your vehicle, you can lock your vehicle after all doors are closed by using the keyless entry keypad, pressing the lock button on another intelligent access key or touching the locking area on the handle with another intelligent access key in your hand.
When you open one of the front doors and lock your vehicle using the power door lock control, all doors will lock then unlock if the ignition is on.
Autolock (If Equipped)
The autolock feature will lock all the doors when:
  • all doors are closed,
  • the ignition is on,
  • you shift into any gear putting your vehicle in motion, and
  • your vehicle attains a speed greater than 4 mph (7 km/h).
Autounlock (If Equipped)
The autounlock feature will unlock all the doors when:
  • the ignition is on, all the doors are closed, and your vehicle has been in motion at a speed greater than 4 mph (7 km/h);
  • your vehicle comes to a stop and you switch the ignition off or to accessory; and
  • you open the driver door within 10 minutes of the switching the ignition off or to accessory.
Note:   The doors will not autounlock if you electronically lock your vehicle after you switch the ignition off and before you open the driver door.
Enabling or Disabling Autolock and Autounlock
Note:   Your authorized dealer can perform this procedure, or you can do the procedure yourself.
To enable or disable these features, do the following:
Note:   You will have 30 seconds to complete the procedure.
  1. Switch the ignition on.
  1. Press the power door unlock button three times.
  1. Switch the ignition off.
  1. Press the power door unlock button three times.
  1. Switch the ignition on. The horn will sound indicating your vehicle is in programming mode.
Autolock: Press the power door unlock button then the lock button. The horn will sound once if disabled or twice (one short and one long) if enabled.
Autounlock: Press the power door lock button then the unlock button. The horn will sound once if disabled or twice (one short and one long) if enabled.
After programming the feature, switch the ignition off. The horn will sound once indicating programming is complete.
Note:   You can enable or disable the autounlock feature independently of the autolock feature.
Illuminated Entry
The interior lamps and select exterior lamps will illuminate when you unlock the doors with the remote entry system.
The illuminated entry system will turn off the lights if:
  • you start your vehicle,
  • you press the remote control lock button, or
  • after 25 seconds of illumination.
The lights will not turn off if:
  • you turn them on with the lamp control, or
  • any door is open.
Illuminated Exit
The interior lamps and select exterior lamps will illuminate when all doors are closed and you switch the ignition off.
The lamps will turn off if all the doors remain closed and:
  • 25 seconds elapse, or
  • you lock your vehicle from the outside.
Battery Saver
If you leave the courtesy lamps or dome lamps on and switch the ignition off, the battery saver shuts them off after some time.
Accessory Mode Battery Saver for Intelligent Access Keys (If Equipped)
If you leave the ignition on after leaving your vehicle, it will shut off 15 minutes after you close all of the doors.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok