WARNING   WARNING:  Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
WARNING   WARNING:  When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes.

Note:   Cruise control disengages if the vehicle speed decreases more than 16 km/h below the set speed while driving uphill.
Cruise Control
The cruise controls are on the steering wheel.
Switching Cruise Control On
Press ON.
Cruise Control  The indicator displays in the instrument cluster.
Setting the Cruise Speed
  1. Drive to desired speed.
  1. Press SET+ or SET-.
  1. Take your foot off the accelerator pedal.
Changing the Set Speed
  • Press SET+ or SET- to change the set speed in small increments.
  • Press the accelerator or brake pedal until you reach the desired speed. Press SET+ or SET-.
  • Press and hold SET+ or SET-. Release the control when you reach the desired speed.
Note:   If you accelerate by pressing the accelerator pedal, the set speed does not change.When you release the accelerator pedal, your vehicle returns to the speed that you previously set.
Canceling the Set Speed
 Pull CAN or tap the brake pedal. The set speed does not erase.
Resuming the Set Speed
PullRES.
Switching Cruise Control Off
Press OFF when the system is in stand by mode, or switch the ignition off.
Note:   You erase the set speed when you switch the system off.