This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Technical Specifications
WARNING:
The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Opening the air conditioning refrigerant system can cause personal injury. Have the air conditioning refrigerant system serviced only by qualified personnel. |
| Item | Capacity | Ford part name or equivalent | Ford part number / Ford specification |
|---|---|---|---|
| Brake fluid 1 | Between MIN and MAX on reservoir | Motorcraft High Performance DOT 4 Low Viscosity (LV) Motor Vehicle Brake Fluid | PM-20 / WSS-M6C65-A2 |
| Door latch, hood latch, auxiliary hood latch, trunk latch, seat tracks | – | Multi-Purpose Grease spray (lithium grease) | XL-5 / ESB-M1C93-B |
| Lock cylinder | – | Motorcraft Penetrating and Lock Lubricant (U.S.) | XL-1 (U.S.) |
| Motorcraft Penetrating fluid (Canada) | CXC-51-A (Canada) | ||
| Automatic transmission fluid 2, 3 | 2.2 gal (8.5 L) | Motorcraft MERCON LV | XT-10-QLVC / MERCON LV |
| Rear differential (All-Wheel Drive) fluid | 2.4 pt (1.15 L) | Motorcraft SAE 80W-90 Premium Rear Axle Lubricant | XY-80W90-QL / WSP-M2C197-A |
| Power transfer unit (PTU) fluid (All-Wheel Drive) 4 | 18 fl oz (0.53 L) | Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant | XY-75W140-QL / WSL-M2C192-A |
| Engine oil 2.0L EcoBoost | 5.7 qt (5.4 L) | Motorcraft SAE 5W-30 Full Synthetic Motor Oil or Motorcraft SAE 5W-30 Premium Synthetic Blend Motor Oil | XO-5W30-QFS or XO-5W30-QSP (U.S.); CXO-5W30-LFS12 or CXO-5W30-LSP12 (Canada) WSS-M2C946-A |
| Engine oil 1.6L EcoBoost | 4.3 qt (4.1 L) | Motorcraft SAE 5W-20 Full Synthetic Motor Oil or Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil | XO-5W20-QFS or XO-5W20-QSP (U.S.); CXO-5W20-LFS12 or CXO-5W20-LSP12 (Canada) / WSS-M2C945-A |
| Engine oil 2.5L | 5.7 qt (5.4 L) | ||
| Engine coolant 5 2.0L EcoBoost | 9.7 qt (9.2 L) | Motorcraft Orange Antifreeze / Coolant Prediluted | VC-3DIL-B (U.S.); CVC-3DIL-B (Canada) / WSS-M97B44-D2 |
| Engine coolant 5 1.6L EcoBoost | 8.5 qt (8 L) | ||
| Engine coolant 5 2.5L | 9.2 qt (8.7 L) | ||
| Windshield washer fluid | Fill as required | Motorcraft Premium Windshield Washer Concentrates (U.S.) | ZC-32-B2 (U.S.) / WSS-M14P19-A |
| Premium Quality Windshield Washer Fluid (Canada) | CXC-37-(A, B, D, and F) (Canada) / WSS-M14P19-A | ||
| Fuel tank | 15.5 gal (58.7 L) | – | – |
| A/C refrigerant 1.6L EcoBoost and 2.5L | 1.5 lb (0.68 kg) | Motorcraft R-134a Refrigerant | YN-19 (U.S.); CYN-16-R(Canada) / WSH-M17B19-A |
| A/C refrigerant 2.0L EcoBoost | 1.7 lb (0.76 kg) | ||
| A/C refrigerant compressor oil | 4.5 fl oz (133 ml) | Motorcraft PAG Refrigerant Compressor Oil | YN-12-D / WSH-M1C231-B |
1Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure.
2Approximate dry fill capacity. Actual amount may vary during fluid changes.
3Automatic transmissions that require Motorcraft MERCON LV transmission fluid should only use Motorcraft MERCON LV transmission fluid.
Use of any fluid other than the recommended fluid may cause transmission damage.
Change the automatic transmission fluid and filter at the correct service interval. See
Scheduled Maintenance.
4See your authorized dealer for fluid level checking or filling.
5Add the coolant type originally equipped in your vehicle.
Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specifications. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricant Standardization and Approval Committee (ILSAC):
Thank You For Your Feedback