This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Memory Function
WARNING:
Before activating the seat memory, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts.
WARNING:
Do not use the memory function when your vehicle is moving. |
This feature will automatically recall the position of the driver's seat and power mirrors. The memory control is located on the driver’s door.
Saving a Pre-Set Position
- Switch the ignition on.
- Adjust the seat and exterior mirrors to your desired position.
- Press and hold the desired pre-set button until you hear a single chime.
You can save up to three pre-set memory positions. You can save a memory pre-set at any time.
Recalling a Pre-Set Position
Press and release the pre-set button associated with your desired driving position. The seat and mirrors will move to the position stored for that pre-set.
Note:
A pre-set memory position can only be recalled when the ignition is off, or when the transmission selector lever is in position P or N (and your vehicle is not moving) if the ignition is on.
You can recall a pre-set memory position by pressing the unlock button on your remote control or intelligent access key if it is linked to a pre-set position.
Linking a Pre-Set Position to your Remote Control or Intelligent Access Key
Your vehicle can save the pre-set memory positions for up to three remote controls or intelligent access (IA) keys.
- With the ignition on, move the memory positions to the desired positions.
- Press and hold the desired pre-set button for about five seconds. A chime will sound after about two seconds. Continue holding until a second chime is heard.
- Within three seconds, press the lock button on the remote control you are linking.
To unlink a remote control, follow the same procedure – except in step 3, press the unlock button on the remote control.
Note:
To stop seat movement during a recall, press any driver seat adjustment control, any of the memory buttons, or any mirror control switch.
Seat movement will also stop if you move your vehicle.
Note:
If more than one linked remote control or intelligent access key is in range, the memory function will move to the settings of the first key stored.
Easy Entry and Exit Function
If you enable the easy entry and exit feature, it automatically moves the driver seat position rearward up to five centimeters when the transmission selector lever is in position P and you remove the key or turn off the keyless start ignition.
The driver seat will return to the previous position when you put the key in the ignition or you activate the keyless start ignition.
You can turn off the easy entry and exit feature by using the driver information display.
- Please note that Ford will not respond to individual feedback.
- Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
- Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.
Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.