This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Power Windows
WARNING:
Do not leave children unattended in your vehicle and do not let them play with the power windows. Failure to follow this instruction could result in personal injury.
WARNING:
When closing the power windows, verify they are free of obstruction and make sure that children and pets are not in the proximity of the window openings. |
Note:
Window operation may stop or delay during low battery conditions and engine re-cranking. It will resume after the engine starts.
Note:
You may hear a pulsing noise when just one of the windows are open.Lower the opposite window slightly to reduce this noise.
Press the switch to open the window.
Lift the switch to close the window.
One-Touch Down
Press the switch fully and release it. Press again or lift it to stop the window.
One-Touch Up
Lift the switch fully and release it. Press or lift it again to stop the window.
Resetting One-Touch Up
Start the engine.
- Lift and hold the window control switch until the door window is fully closed. Continue to hold the switch for a few seconds after the window is closed.
- Release the window switch.
- Press and hold the window switch until the door window is fully open.
- Release the window switch.
- Lift and hold the window switch until the window is fully closed.
- Test for correct window operation by carrying out the one-touch down and one-touch up features.
Bounce-Back
The window will stop automatically while closing. It will reverse some distance if there is an obstacle in the way.
Overriding the Bounce-Back Feature
|
WARNING:
When you override the bounce-back feature the window will not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury or damage to your vehicle. |
Pull up the window switch and hold within two seconds of the window reaching the bounce-back position.The window will travel up with no bounce-back protection.The window will stop if you release the switch before the window closes fully.
Window Lock
Press the control to lock or unlock the rear window controls.It will illuminate when you lock the rear window controls.
Accessory Delay
You can use the window switches for several minutes after you switch the ignition off or until you open either front door.