This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Using Traction Control
In certain situations for example, stuck in snow or mud, turning the traction control off may be beneficial as this allows the wheels to spin with full engine power. Depending on the type of system you have on your vehicle, you can either turn the system off using the information display or by pressing the button.
Switching the System Off Using the Information Display Controls (If Equipped)
Your vehicle comes with this feature already enabled. If required, you can switch this feature off using the information display controls. See
General Information.
Switching the System Off Using a Switch (If Equipped)
The button is located in the instrument panel.
Press the button. You will see a message in conjunction with an illuminated icon in the display. Press the button again to return the system to normal mode.
When you switch the traction control system off, stability control remains fully active.
System Indicator Lights and Messages
WARNING:
If a failure has been detected within the AdvanceTrac system, the stability control light will illuminate steadily. Verify that the AdvanceTrac system was not manually disabled through the information display. If the stability control light still illuminates steadily, have the system serviced by an authorized dealer immediately. Operating your vehicle with AdvanceTrac disabled could lead to an increased risk of loss of vehicle control, vehicle rollover, personal injury and death. |
The stability control light temporarily illuminates on engine start-up and flashes when a driving condition activates the stability system. | 
The stability control off light temporarily illuminates on engine start-up and stays on when you turn the traction control system off. |
When you turn the traction control system off or on, a message appears in the information display showing system status.
Thank You For Your Feedback