Power Distribution Box
WARNING:
Always disconnect the battery before servicing high-current fuses.
WARNING:
To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. |
The power distribution box is located in the engine compartment. It has high-current fuses that protect your vehicle's main electrical systems from overloads.
If the battery has been disconnected and reconnected, some features will need to be reset. See
Changing the 12V Battery.

Fuse or relay number
| Fuse amp rating
| Protected components
|
---|
1
| 25A3
| Wiper motor #2
|
2
| —
| Starter relay
|
3
| 15A1
| Autowipers
|
4
| —
| Blower motor relay
|
5
| 20A3
| Power point 3 - Back of console
|
6
| —
| Not used
|
7
| 20A1
| Powertrain control module - vehicle power 1
|
8
| 20A1
| Powertrain control module - vehicle power 2
|
9
| —
| Powertrain control module relay
|
10
| 20A3
| Power point 1 - driver front
|
11
| 15A2
| Powertrain control module - vehicle power 4
|
12
| 15A2
| Powertrain control module - vehicle power 3
|
13
| 10A2
| Powertrain control module - vehicle power 5
|
14
| 10A2
| Powertrain control module - vehicle power 6
|
15
| —
| Run/start relay
|
16
| 20A3
| Power point 2 - console
|
17
| —
| Not used
|
18
| 10A1
| Powertrain control module - keep alive power
|
19
| 10A1
| Run/start electronic power assist steering
|
20
| 10A1
| Run/start lighting
|
21
| 15A1
| Run/start transmission control, Transmission oil pump start/stop
|
22
| 10A1
| Air conditioner clutch solenoid
|
23
| 15A1
| Run/start: blind spot information system, Rear view camera, Adaptive cruise control, Heads-up display
|
24
| —
| Not used
|
25
| 10A2
| Run/start anti-lock brake system
|
26
| 10A2
| Run/start powertrain control module
|
27
| 10A1
| Not used (spare)
|
28
| —
| Not used
|
29
| —
| Not used
|
30
| —
| Not used
|
31
| —
| Not used
|
32
| —
| Electronic fan #1 relay
|
33
| —
| Air conditioner clutch relay
|
34
| —
| Not used
|
35
| —
| Not used
|
36
| —
| Not used
|
37
| —
| Not used
|
38
| —
| Electronic fan #2 relay
|
39
| —
| Electronic fan #3 relay
|
40
| —
| Fuel pump relay
|
41
| —
| Horn relay
|
42
| —
| Not used
|
43
| —
| Not used
|
44
| —
| Not used
|
45
| —
| Not used
|
46
| 10A2
| Alternator
|
47
| 10A2
| Brake on/off switch
|
48
| 20A1
| Horn
|
49
| 5A1
| Mass air flow monitor
|
50
| —
| Not used
|
51
| —
| Not used
|
52
| —
| Not used
|
53
| 10A1
| Power seats
|
54
| —
| Not used
|
55
| —
| Not used
|
1Micro fuse
2Dual micro fuse
3M-type fuse
Power Distribution Box - Bottom
There are fuses located on the bottom of the fuse box. To access the bottom of the fuse box, do the following:

- Release the two latches, located on both sides of the fuse box.
- Raise the inboard side of the fuse box from the cradle.
- Move the fuse box toward the center of the engine compartment.
- Pivot the outboard side of the fuse box to access the bottom side.

Fuse or relay number
| Fuse amp rating
| Protected components
|
---|
56
| 30A1
| Fuel pump feed
|
57
| —
| Not used
|
58
| —
| Not used
|
59
| 30A1
| 500W Electronic fan 3
|
60
| 30A1
| 500W Electronic fan 1
|
61
| —
| Not used
|
62
| 50A2
| Body control module 1
|
63
| 20A1
| 500W Electronic fan 2
|
64
| —
| Not used
|
65
| 20A1
| Front heated seat
|
66
| —
| Not used
|
67
| 50A2
| Body control module 2
|
68
| 40A1
| Heated rear window
|
69
| 30A1
| Anti-lock brake system valves
|
70
| 30A1
| Passenger seat
|
71
| —
| Not used
|
72
| 30A1
| Not used (spare)
|
73
| 20A1
| Not used (spare)
|
74
| 30A1
| Driver seat module
|
75
| —
| Not used
|
76
| 20A1
| Transmission oil pump #2 stop/start
|
77
| 30A1
| Not used (spare)
|
78
| —
| Not used
|
79
| 40A1
| Blower motor
|
80
| 30A1
| Not used (spare)
|
81
| 40A1
| 110 volt inverter
|
82
| 60A2
| Anti-lock brake system pump
|
83
| 25A1
| Wiper motor #1
|
84
| 30A1
| Starter solenoid
|
85
| 30A1
| Not used (spare)
|
1 M-type fuse
2J-type fuse
Passenger Compartment Fuse Panel
The fuse panel is located under the instrument panel to the left of the steering column.
Note:
It may be easier to access the fuse panel if you remove the finish trim piece.

Fuse or relay number
| Fuse amp rating
| Protected components
|
---|
1
| 10A1
| Lighting (ambient, glove box, vanity, dome, trunk)
|
2
| 7.5A1
| Memory seats, Lumbar, Power mirror
|
3
| 20A1
| Driver door unlock
|
4
| 5A1
| Not used (spare)
|
5
| 20A1
| Subwoofer amplifier
|
6
| 10A2
| Not used (spare)
|
7
| 10A2
| Not used (spare)
|
8
| 10A2
| Not used (spare)
|
9
| 10A2
| Not used (spare)
|
10
| 5A2
| Keypad
|
11
| 5A2
| Not used
|
12
| 7.5A2
| Climate control, Gear shift
|
13
| 7.5A2
| Steering wheel column, Cluster, Datalink logic
|
14
| 10A2
| Not used
|
15
| 10A2
| Datalink/Gateway module
|
16
| 15A1
| Not used (spare)
|
17
| 5A2
| Not used (spare)
|
18
| 5A2
| Ignition, Push button stop/start
|
19
| 5A2
| Passenger airbag disabled indicator, Transmission range
|
20
| 5A2
| Not used (spare)
|
21
| 5A2
| Humidity and in–car temperature
|
22
| 5A2
| Occupant classification sensor
|
23
| 10A1
| Delayed accessory (Power inverter logic, Moonroof logic)
|
24
| 30A1
| Central lock/unlock
|
25
| 30A1
| Driver door (window, mirror)
|
26
| 30A1
| Front passenger door (window, mirror)
|
27
| 30A1
| Moonroof
|
28
| 20A1
| Sony amplifier
|
29
| 30A1
| Rear driver side door (window)
|
30
| 30A1
| Rear passenger side door (window)
|
31
| 15A1
| Not used (spare)
|
32
| 10A1
| GPS, Voice control, Display, Adaptive cruise control, Radio frequency receiver
|
33
| 20A1
| Radio, Active noise control
|
34
| 30A1
| Run/start bus (fuse #19, 20, 21, 22, 35, 36, 37, circuit breaker)
|
35
| 5A1
| Restraints control module
|
36
| 15A1
| Auto-dimming rear view mirror
|
37
| 15A1
| All-wheel drive module, Heated steering wheel module
|
38
| 30A
| Not used (spare)
|
1Micro fuse
2Dual micro fuse