This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
WARNING:
Do not use fuel lines, engine rocker covers or the intake manifold as grounding points. WARNING:
Connect batteries with only the same nominal voltage. WARNING:
Always use booster cables with insulated clamps and adequate size cable.
Note:
Do not disconnect the battery from your vehicle’s electrical system.
Position the vehicles so that they do not touch one another.
Switch off the engine and any electrical equipment.
Connect the positive (+) terminal of vehicle B with the positive (+) terminal of vehicle A (cable C).
Connect the negative (-) terminal of vehicle B to the ground connection of vehicle A (cable D).
WARNING:
Do not connect directly to the negative (–) terminal of the battery with low charge. WARNING:
Make sure that the cables are clear of any moving parts and fuel delivery system parts.
To Start the Engine
Run the engine of vehicle B at a moderately high speed.
Start the engine of vehicle A.
Run both vehicles for a minimum of three minutes before disconnecting the cables.
WARNING:
Do not switch on the headlamps when disconnecting the cables. The peak voltage could blow the bulbs.