WARNING:
The system may not function if the key is close to metal objects or electronic devices such as cell phones.
WARNING:
Always check that the steering wheel lock is deactivated before attempting to move your vehicle. |
Note:
The ignition will automatically switch off when you leave your vehicle unattended. This is to prevent your vehicle battery running out of charge.
Note:
A valid key must be located inside your vehicle to switch the ignition on and start the engine.
Ignition On
Press the button once. It is located on the instrument panel near the steering wheel. All electrical circuits and accessories are operational and the warning lamps and indicators will illuminate.

Starting With Manual Transmission
Note:
Releasing the clutch pedal while the engine is starting will stop the engine cranking and return to ignition on.
- Fully depress the clutch pedal.
- Briefly press the button.
Starting With Automatic Transmission
Note:
Releasing the brake pedal while the engine is starting will stop the engine cranking and return to ignition on.
- Move the transmission selector lever to position P or N.
- Fully depress the brake pedal.
- Briefly press the button.
Starting a Diesel Engine
Note:
Engine cranking will not commence until the engine glow plug indicator has extinguished. This may take several seconds in extremely cold conditions.
Failure to Start
All Vehicles
The system will not function if:
- The key frequencies are jammed.
- The key battery has no charge.
If you are unable to start your vehicle, do the following.

- Hold the key next to the steering column exactly as shown.
- With the key in this position you can use the button to switch the ignition on and start your engine.
Manual Transmission
Note:
Releasing the clutch pedal while the engine is starting will stop the engine cranking and return to ignition on. A message will be shown in the display.
If the engine does not crank when the clutch pedal has been fully depressed and the button is pressed:
- Fully depress both the clutch and brake pedals.
- Press the button until the engine starts.
Stopping the Engine When Your Vehicle is Stationary
Note:
The ignition, all electrical circuits warning lamps and indicators will be switched off.
Manual Transmission
Press the button.
Automatic Transmission
- Move the transmission selector lever to position P.
- Press the button.
Stopping the Engine When Your Vehicle is Moving
WARNING:
Switching off the engine when the vehicle is still moving will result in a loss of brake and steering assistance. The steering will not lock, but higher effort will be required. When the ignition is switched off, some electrical circuits, including air bags, warning lamps and indicators may also be off. If the ignition was turned off accidentally, you can shift into neutral (N) and re-start the engine. |
- Press and hold the button for at least one second or press it three times within two seconds.
- Move the transmission selector lever to position N and use the brakes to bring your vehicle to a safe stop.
- When your vehicle has stopped, move the transmission selector lever to position P or N and switch the ignition off.