You can clear all MyKeys within the same key cycle as you created the MyKey. If you switch your ignition off, however, you will need to use an admin key to clear your MyKeys.
Note:   When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status at once.
To clear all MyKeys of all MyKey settings, use the information display. There are two types of information displays, and their controls and messaging vary. To determine which type of display you have, you will need to reference another chapter.   See   General Information
If You Have a Type 1 Information Display:
  1. Press SETUP until PRESS RESET TO CLEAR MYKEY displays.
  1. Press and release the RESET button. The display will show HOLD RESET TO CONFIRM CLEAR.
  1. Press and hold the RESET button for two seconds until ALL MYKEYS CLEARED displays.
If You Have a Type 2 Information Display:
  1. Access the main menu and select SETTINGS, then MYKEY.
  1. Scroll to CLEAR ALL and press the OK button.
  1. Hold the OK button until ALL MYKEYS CLEARED displays.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok