Power Exterior Mirrors (If Equipped)
WARNING   WARNING:  Do not adjust the mirrors when your vehicle is moving.

Power Mirror Control
ALeft-hand mirror
BOff
CRight-hand mirror
To adjust a mirror:
  1. Rotate the control to select the mirror you want to adjust.
  1. Adjust the position of the mirror.
  1. Return the control to the center position to lock mirrors in place.
Fold-Away Exterior Mirrors
For tight parking conditions, you can push the mirror toward the door window glass. Before driving, make sure that you fully engage the mirror in its support when returning it to its original position.
Power-Folding Mirrors (If Equipped)
Power-Folding Mirror Control
  1. Rotate the control so the dots line up.
  1. Pull the control back to fold the mirrors in or out.
Note:   If you repeatedly fold and unfold the mirrors several times within one minute, the system may disable to protect the motors from overheating. It will reset to normal function automatically within three to five minutes.
You can also fold a mirror manually by pushing it toward the door window glass. After you manually adjust the mirror, you will need to reset it.
To reset the power-folding mirror system and return it to its normal function:
  • Fold the mirror manually by pushing it toward the door window glass.
  • Use the power-fold control to fold and unfold the mirror two or three times. The mirror will make a sound as it resets.
Heated Exterior Mirrors (If Equipped)
Memory Mirrors (If Equipped)
You can save and recall the mirror positions through the memory function.   See   Memory Function
Clearance Lamps (If Equipped)
The lower, outer part of the mirror housings light when you switch the headlamps or parking lamps on.
Telescoping Mirrors (If Equipped)
Telescoping Mirror
This feature lets you extend the mirror about 3 inches (75 millimeters). It is useful when towing a trailer. You can manually pull out or push in the mirrors to the desired position.
PowerScope™ Power Telescoping Mirrors (If Equipped)
This feature lets you position both mirrors in or out at the same time. The control is on the door trim panel.
Telescoping Mirror Control
ATelescope Out
BTelescope In
To adjust the mirrors:
  • Press and hold the control.
  • When you position the mirrors in or out, the motors will run as long as you hold the control. The running motors allow you to make adjustments as needed.
  • After positioning the mirrors, return the control to the center position to help protect the motors from overheating.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok