WARNING   WARNING:  Using recovery hooks is dangerous and should only be done by a person familiar with proper vehicle recovery safety practices. Improper use of recovery hooks may cause hook failure or separation from the vehicle and could result in serious injury or death.
WARNING   WARNING:  Always slowly remove the slack from the recovery strap prior to pulling. Failure to do so can introduce significantly higher loads which can cause the recovery hooks to break off, or the recovery strap to fail which can cause serious injury or death.
WARNING   WARNING:  Never link two straps together with a clevis pin. These heavy metal objects could become projectiles if the strap breaks and can cause serious injury or death.

Your vehicle comes equipped with frame-mounted front recovery hooks. These hooks should never have a load applied to them greater than the gross vehicle weight rating of your vehicle.
Before using recovery hooks:
  • Make sure all attaching points are secure and capable of withstanding the applied load.
  • Never use chains, cables or tow straps with metal hook ends.
  • Only use recovery straps that have a minimum breaking strength two to three times the gross vehicle weight of the stuck vehicle.
  • Make sure the recovery strap is in good condition and free of visible cuts, tears or damage.
  • Use a damper device such as a tarp, heavy blanket or piece of carpet draped over the recovery strap to help absorb the energy in the event the strap breaks.
  • Make sure the stuck vehicle is not loaded heavier than its gross vehicle weight rating specified on the certification label.
  • Always align the tow vehicle and stuck vehicle in a straight line (within 10 degrees).
  • Keep bystanders to the sides of the vehicle, at a distance of at least twice the length of the recovery strap. This helps avoid injury from the hazard of a recovery hook or strap breaking, or a vehicle lurching into their path.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok