WARNING   WARNING:  Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.

Note:   If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used.
Note:   This procedure is for replacing the headlamps, park lamps or turn lamps.
  1. Make sure the headlamp control is in the off position and open the hood.
Replacing Headlamp Bulb
  1. Using masking tape or a marker, make an alignment mark between one of the grille brackets and the vehicle radiator support to ensure correct grille alignment during the installation procedure. Do not scratch the black coating from the radiator support.
  1. Remove the two grille to headlamp assembly push pins and the four bolts attaching the top of the grille to the radiator support.
  1. Pull the top of the grille forward to gain access to the lower grille spring clips.
  1. Depress the spring clips through the lower inner grille access openings using a flat head screwdriver.
  1. Pull the grill straight out to remove.
Headlamp Installation
  1. Remove the four bolts from the headlamp assembly.
  1. Pull the assembly straight out disengaging one snap clip from the fender.
  1. Disconnect the electrical connector by squeezing the release tab and pushing the connector forward, then pulling it rearward.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok