Note:   Depending on your vehicle options and instrument cluster type, not all of the messages will display or be available. Additionally, the information display may abbreviate or shorten certain messages.
Press the RESET button for Type 1 displays or the OK button for Type 2 displays to acknowledge and remove some messages from the information display. The information display automatically removes other messages after a short time.
You need to confirm certain messages before you can access the menus.
AdvanceTrac™

Message   Action  
SERVICE ADVANCETRAC   The system detects a condition that requires service. Have the system checked by an authorized dealer.  
ADVANCETRAC OFF   The driver has disabled the stability control system.   See   Using Stability Control.   
TRACTION CONTROL OFF   The driver has disabled the traction control system.  See   Using Traction Control.   

Alarm

Message   Action  
TO STOP ALARM START VEHICLE   An unauthorized entry has triggered the alarm.  See   Anti-Theft Alarm.   
SECURITY SYSTEM FAULT   The security system has detected a fault. Have the system checked by an authorized dealer.  

Diesel Messages
WARNING   WARNING:  When the CLEANING EXHAUST FILTER message appears in the information display, do not park near flammable materials, vapors or structures until filter cleaning is complete.


Message   Action  
CHECK COOLANT ADDITIVE   The coolant additive needs checking. Refer to your diesel supplement for more information.  
CLEANING EXHAUST FILTER   Your vehicle has entered the cleaning mode. Various engine actions will raise the exhaust temperature in the Diesel Particulate Filter system to burn off the particles (exhaust soot). After the vehicle burns the particles off the exhaust temperature will return to normal levels. This message is NORMAL. Refer to your diesel supplement for more information.  
EXHAUST OVERLOADED DRIVE TO CLEAN   EXHAUST AT LIMIT DRIVE TO CLEAN NOW   The diesel particulate filter is full of particles (exhaust soot) and you are not operating the vehicle in a manner that allows normal cleaning. One of these messages will stay on until the exhaust filter cleaning has begun, at which time the CLEANING EXHAUST FILTER message displays. We recommend you drive the vehicle above 30 mph (48 km/h) until the CLEANING EXHAUST FILTER message turns off. Refer to your diesel supplement for more information.   The diesel particulate filter will continue to fill with particles (exhaust soot) if you ignore this message. The service engine soon light will illuminate and engine power may be limited, if cleaning is not permitted. Dealer service will then be required to restore your vehicle to full-power operation.  
STOP SAFELY NOW   Your vehicle exhaust system temperature exceeds intended operating range. If this warning occurs, a chime will sound, followed by reduced engine power. The engine will shut down when your vehicle speed is below 3 mph (5 km/h). Stop the vehicle as soon as safely possible. Have the system checked by an authorized dealer.  
ENGINE OIL DILUTED   The diluted engine oil needs to be changed. Refer to your diesel supplement for more information.  
ENGINE TURNS OFF IN 1 SECOND   The powertrain control module will intentionally turn the engine off due to your vehicle being in the final second of a countdown. The diesel engine shutdown is an optional feature. Refer to your diesel supplement for more information.  
ENGINE TURNS OFF IN XX SECONDS   The powertrain control module will intentionally turn the engine off due to your vehicle being in the final 30 seconds of a countdown. The diesel engine shutdown for extended idling is an optional feature. Refer to your diesel supplement for more information.  
ENGINE TURNED OFF   Appears after the 30 second countdown. Refer to your diesel supplement for more information.  
ENGINE WARMING PLEASE WAIT   In extremely cold weather, typically below –15°F (–26°C) and if the engine block heater is not utilized, your engine will not respond to accelerator pedal movement for 30 seconds. This restriction allows your engine to circulate the oil properly in order to avoid engine damage. Refer to your diesel supplement for more information.  
EXHAUST FILTER DRIVE COMPLETE   Your diesel particulate filter is clean. Refer to your diesel supplement for more information.  
EXHAUST FILTER CLEANED   Your diesel particulate filter is clean. Refer to your diesel supplement for more information.  
EXHAUST CLEAN STOPPED   The manual operator commanded regeneration process has stopped. Refer to your diesel supplement for more information.  
EXHAUST FLUID RANGE XXX MI   The distance you can travel before depleting the remaining diesel exhaust fluid. Refer to your diesel supplement for more information.  
IN XX MILES, SPEED LIMITED TO XX MPH EXHAUST FLUID EMPTY   Your diesel exhaust fluid is nearing empty. Your vehicle’s top speed will become limited in the displayed distance. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle. Refer to your diesel supplement for more information.  
SPEED LIMITED TO XX MPH UPON RESTART EXHAUST FLUID EMPTY   Your remaining diesel exhaust fluid has depleted. Your speed will be limited upon restart. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle. Refer to your diesel supplement for more information.  
SPEED LIMITED TO XX MPH EXHAUST FLUID EMPTY   The diesel exhaust fluid is empty. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle. Refer to your diesel supplement for more information.  
ENGINE IDLED SOON EXHAUST FLUID EMPTY   The selective catalytic reduction system detects low exhaust fluid. The engine will eventually enter into an idle only mode. You must replenish the diesel exhaust fluid to resume normal operation of your vehicle. Refer to your diesel supplement for more information.  
ENGINE IDLED - SEE OWNER’S MANUAL EXHAUST FLUID EMPTY   A problem exists with the selective catalytic reduction system. The vehicle will enter into an idle-only mode. If the exhaust fluid is empty, you must replenish the diesel exhaust fluid to resume normal operation of your vehicle. Refer to your diesel supplement for more information.  
IN XX MILES, SPEED LIMITED TO 50 MPH EXHAUST FLUID SYSTEM FAULT   The selective catalytic reduction system detects a fault. The vehicle’s top speed will become limited in the displayed distance starting at 50 miles (80 km) and count down from this point. Refer to your diesel supplement for more information. Have the system checked by an authorized dealer.  
SPEED LIMITED TO 50 MPH UPON RESTART EXHAUST FLUID SYSTEM FAULT   The selective catalytic reduction system detects a fault. The vehicle’s top speed will become limited upon restarting. Refer to your diesel supplement for more information. Have the system checked by an authorized dealer.  
SPEED LIMITED TO 50 MPH EXHAUST FLUID SYSTEM FAULT   The selective catalytic reduction system detects a fault. The vehicle’s top speed is limited. Refer to your diesel supplement for more information. Have the system checked by an authorized dealer.  
FUEL FILTER CHANGE REQUIRED   A fuel filter change is required.   See   Normal Scheduled Maintenance.   
EXHAUST OVER LIMIT SERVICE NOW   You must have your vehicle serviced by an authorized dealer if approximately two hours after the EXHAUST OVERLOADED DRIVE TO CLEAN message has displayed and you have not driven your vehicle above 30 mph (48 km/h) for at least 20 minutes to clean the diesel particulate filter. Refer to your diesel supplement for more information.   You are responsible for assuring that you operate your vehicle in a manner that allows diesel particulate filter cleaning to occur. Ignoring the EXHAUST OVER LIMIT SERVICE NOW warning message could lead to reduced drivability and customer expense, including damage to the diesel particulate filter. Your new vehicle warranty may not cover this damage.  
WATER IN FUEL DRAIN FILTER SEE MANUAL   The water separator has reached a predetermined capacity and needs draining. Refer to your diesel supplement for more information.  
LOW FUEL PRESSURE   A low fuel pressure condition has occurred due to cold, low fuel level or fuel filters need to be changed. Refer to your diesel supplement for more information.  

Doors and Locks

Message   Action  
X Door Ajar   The door listed is not completely closed.  

Drivetrain

Message   Action  
LOCKING DIFFERENTIAL ENGAGED   The electronic locking differential is engaged.  
ELD ENGAGED  
LOCKING DIFFERENTIAL DISENGAGED   The electronic locking differential is disengaged.  
ELD DISENGAGED  
TO ENGAGE LOCKING DIFFERENTIAL SLOW TO XX MPH/KM/H   The electronic locking differential requests a certain speed requirement to engage.  
TO ENGAGE ELD SLOW TO XX MPH/KM/H  
TO ENGAGE LOCKING DIFFERENTIAL RELEASE ACCELERATOR PEDAL   The electronic locking differential request the release of the accelerator pedal in order to engage.  
TO ENGAGE ELD RELEASE PEDAL  
SLOW VEHICLE TO XX KM/H FOR ELD   The electronic locking differential requests a certain speed requirement to engage.  
SLOW VEHICLE TO XX MPH FOR ELD   The electronic locking differential requests a certain speed requirement to engage.  
CHECK LOCKING DIFFERENTIAL   An electronic locking differential system fault is present.   See   Using Four-Wheel Drive.   
SHIFT TO PARK   A reminder to shift into park.  

Engine

Message   Action  
TRANSPORT MODE CONTACT DEALER   Your vehicle is set to transport mode. The transport mode disables certain vehicle functions to prevent battery discharge.  
POWER REDUCED TO LOWER ENGINE TEMP   The engine has reduced power in order to help reduce high coolant temperature   See   Engine Coolant Check.   

Fuel

Message   Action  
FUEL LEVEL LOW   An early reminder of a low fuel condition.  
CHECK FUEL CAP   The fuel cap may not be properly closed.  

Key

Message   Action  
COULD NOT PROGRAM INTEGRATED KEY   You have attempted to program a fifth integrated key.   See   Replacing a Lost Key or Remote Control.   
TO DRIVE: TURN KEY TO ON   The factory equipped remote start is active. Turn your key to on to drive.  

Maintenance

Message   Action  
ENGINE OIL CHANGE SOON   The engine oil life is nearing its end.   See   Engine Oil Check.   
OIL CHANGE REQUIRED   The oil life left reaches 0%.   See   Engine Oil Check.   
BRAKE FLUID LEVEL LOW   The brake fluid level is low and the brake system needs inspection immediately.   See   Brake Fluid Check.   
CHECK BRAKE SYSTEM   The brake system needs servicing. If the warning stays on or continues to come on, have the system checked by an authorized dealer as soon as possible.  

MyKey®

Message   Action  
MYKEY ACTIVE DRIVE SAFELY   MyKey is active.  
ADVANCETRAC ALWAYS ON - MYKEY SETTING   A MyKey is in use and you cannot turn off the electronic stability control.  
VEHICLE NEAR TOP SPEED   A MyKey is in use, the MyKey speed limit is on and your vehicle speed is approaching 80 mph (130 km/h).  
VEHICLE AT TOP SPEED - MYKEY SETTING   A MyKey is in use, the MyKey speed limit is on and your vehicle speed is 80 mph (130 km/h).  
SPEED LIMITED TO 80 MPH   When starting your vehicle and MyKey is in use and the MyKey speed limit is on.  
SPEED LIMITED TO 130 KM/H   When starting your vehicle and MyKey is in use and the MyKey speed limit is on.  
CHECK SPEED DRIVE SAFELY   A MyKey is in use, the optional setting is on and your vehicle exceeds a preselected speed.  
BUCKLE UP TO UNMUTE AUDIO   A MyKey is in use and Belt-Minder® is active.  
MYKEY COULD NOT PROGRAM   An attempt failed to program a spare key using two existing MyKeys.  

Park Aid

Message   Action  
CHECK REAR PARK AID   The transmission is in R (Reverse) and the park aid is disabled.  
REAR PARK AID OFF   The rear park aid is disabled.  
REAR PARK AID ON   The rear park aid is enabled.  

Park Brake

Message   Action  
PARK BRAKE ENGAGED   The parking brake is set and your vehicle is in motion.  

Off Road

Message   Action  
HILL DESCENT CONTROL OFF   The driver has disabled hill descent control mode.  
FOR HILL DESCENT REDUCE SPEED   You have not met the vehicle speed requirement for entry into off-road mode.  
FOR HILL DESCENT SELECT GEAR   The driver is able to select a transmission gear for hill descent mode.  
HILL DESCENT - DRIVER RESUME CONTROL   Hill descent control mode is no longer active and the driver must resume control.  
HILL DESCENT CONTROL FAULT   A hill descent system fault is present.  
HILL DESCENT CONTROL OFF SYSTEM COOLING   The hill descent system is cooling due to overuse.  
HILL DESCENT CONTROL READY   Hill descent control is active.  

Tire Pressure Monitoring System

Message   Action  
LOW TIRE PRESSURE   One or more tires on your vehicle have low tire pressure.   See   Tire Pressure Monitoring System.   
TIRE PRESSURE MONITOR FAULT   The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to come on, have the system checked by an authorized dealer.   See   Tire Pressure Monitoring System.   
TIRE PRESSURE SENSOR FAULT   A tire pressure sensor is malfunctioning, or your spare tire is in use. For more information on how the system operates under these conditions, see   See   Tire Pressure Monitoring System.  If the warning stays on or continues to come on, have the system checked by an authorized dealer as soon as possible.  

Trailer

Message   Action  
TRAILER BRAKE GAIN: XX.X [OUTPUT]   The current gain setting for the trailer brake.  
TRAILER BRAKE GAIN: XX.X NO TRAILER   The current gain setting for the trailer brake when a trailer is not connected.  
TRAILER BRAKE MODULE FAULT   Accompanied by a single chime, in response to faults sensed by the TBC.   See   Trailer Sway Control.   
TRAILER CONNECTED   A correct trailer connection (a trailer with electric trailer brakes) is sensed during a given ignition cycle.  
TRAILER DISCONNECTED   A trailer connection becomes disconnected, either intentionally or unintentionally, and has been sensed during a given ignition cycle. Disregard this status if your vehicle is not equipped with a factory installed trailer brake controller. This message may appear when an aftermarket TBC is used even when the trailer is connected.  
TRAILER SWAY REDUCE SPEED   Your trailer sway control has detected trailer sway so you need to reduce your speed.  
WIRING FAULT ON TRAILER   Faults with your vehicle wiring and trailer wiring or brake system.   See   Towing a Trailer.   

4WD

Message   Action  
CHECK 4X4   A fault is present in your 4X4 system.   See   Using Four-Wheel Drive.   
4X4 SHIFT IN PROGRESS   Your 4X4 system is making a shift.  
FOR 4X4 LOW APPLY BRAKE   You need to apply the brake in order to shift into 4X4 LOW.  
FOR 4X4 LOW SHIFT TO N   When your vehicle is at a stop and you need to shift into Neutral before you select 4X4 LOW.  
FOR 4X4 LOW SLOW TO 3 MPH   When your vehicle is moving and you need to reduce your speed to select 4X4 LOW.  
TO EXIT 4X4 LOW APPLY BRAKE   You select 2WD and need to apply the brakes in order to exit 4X4 LOW.  
TO EXIT 4X4 LOW SHIFT TO N   You select 2WD while your vehicle is at a stop in 4X4 LOW and you need to shift into Neutral.  
TO EXIT 4X4 LOW SLOW TO 3 MPH   You select 2WD while your vehicle is operating in 4X4 LOW and you need to reduce your speed.  
SHIFT DELAYED PULL FORWARD   May display when shifting to or from 4X4 LOW.  

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok