12 Volt DC Power Point
WARNING   WARNING:  Do not plug optional electrical accessories into the cigar lighter socket. Incorrect use of the cigar lighter can cause damage not covered by the vehicle warranty, and can result in fire or serious injury.
WARNING   WARNING:  Do not use a power point for operating a cigar lighter.Incorrect use of the power points can cause damage not covered by the vehicle warranty, and can result in fire or serious injury.

Note:   When you switch the ignition on, you can use the socket to power 12 volt appliances with a maximum current rating of 15 amps.If the power supply does not work after you switch the ignition off, switch the ignition on.
Note:   Do not hang any accessory from the accessory plug.
Note:   Do not use the power point over the vehicle capacity of 12 volt DC 180 watts or a fuse may blow.
Note:   Always keep the power point caps closed when not in use.
 Do not insert objects other than an accessory plug into the power point. This will damage the power point and blow the fuse.
Run the vehicle for full capacity use of the power point.
To prevent the battery from running out of charge:
  • Do not use the power point longer than necessary when the vehicle is not running.
  • Do not leave devices plugged in overnight or when you park your vehicle for extended periods.
Locations
Power points may be in the following locations:
  • On the instrument panel.
  • Inside the center console.
  • On the rear of the center console.
  • Inside the front under-seat storage compartment (if equipped).
  • Inside the rear under-seat storage compartment (if equipped).
110 Volt - 400 Watt Capacity AC Power Outlet
WARNING   WARNING:  Do not keep electrical devices plugged in the power point whenever the device is not in use. Do not use any extension cord with the 110 volt AC power point, since it will defeat the safety protection design. Doing so may cause the power point to overload due to powering multiple devices that can reach beyond the 400 watt load limit and could result in fire or serious injury.

110 Volt - 400 Watt Capacity AC Power OutletWhen the indicator light on the power point is:
  • On: The power point is working, the ignition is on and a device is plugged in.
  • Off: The power point is off, the ignition is off or no device is plugged in.
  • Flashing: The power point is in fault mode.
 The power outlet temporarily turns off power when in fault mode if the device exceeds the 400 watt limit. Unplug your device and switch the ignition off. Switch the ignition back on, but do not plug your device back in. Let the system cool off and switch the ignition off to reset the fault mode. Switch the ignition back on and make sure the indicator light remains on.
You can use the 400 watt power outlet for these types of electric devices:
  • Electric hand drills.
  • Rechargeable power tools.
  • Video games.
  • Laptops.
  • Televisions.
Do not use the power point for certain electric devices, including:
  • Cathode-ray, tube-type televisions.
  • Motor loads, such as vacuum cleaners, electric saws and other electric power tools or compressor-driven refrigerators.
  • Measuring devices, which process precise data, such as medical equipment or measuring equipment.
  • Other appliances requiring an extremely stable power supply such as microcomputer-controlled electric blankets or touch-sensor lamps.
Note:   This feature works only when the vehicle is running.
Note:   This feature has a maximum output of 400 watts when the vehicle is in park (P).
Note:   While in drive (D), the maximum outlet output is 300 watts.
Note:   When powering electric devices that require more than 10 watts in vehicles equipped with keyless start, the vehicle must remain running.It does not allow you to switch the ignition off or switch the ignition to accessory mode.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok