WARNING:
Always fully apply the parking brake. Make sure you shift into park (P) for vehicles with an automatic transmission. Switch the ignition off and remove the key whenever you leave your vehicle.
WARNING:
Do not apply the brake pedal and accelerator pedal simultaneously. Applying both pedals simultaneously for more than a few seconds will limit engine performance, which may result in difficulty maintaining speed in traffic and could lead to serious injury. |
Understanding the Positions of Your Automatic Transmission
Putting your vehicle in gear:
- Fully press down the brake pedal.
- Move the selector lever into the desired gear.
- Come to a complete stop.
- Move the selector lever and securely latch it in park (P).

Park (P)
This position locks the transmission and prevents the wheels from turning.
Reverse (R)
With the selector lever in reverse (R), your vehicle moves backward. Always come to a complete stop before shifting into and out of reverse (R).
Neutral (N)
With the selector lever in neutral (N), your vehicle can be started and is free to roll. Hold the brake pedal down while in this position.
Drive (D)
Drive (D) is the normal driving position for the best fuel economy. The overdrive function allows automatic upshifts and downshifts through gears one through six.
Manual (M)
With the selector lever in manual (M), you can change gears up or down as desired by using buttons on the shift lever. See SelectShift Automatic™ Transmission later in this section.
To return to normal drive (D) position, move the shift lever back from manual (M) to drive (D).
SelectShift Automatic™ Transmission (If Equipped)
Your vehicle is equipped with a SelectShift Automatic transmission selector lever. The SelectShift Automatic transmission gives you the ability to change gears up or down (without a clutch) as desired.
In order to prevent the engine from running at too low an RPM, which may cause it to stall, SelectShift still automatically makes some downshifts if it has determined that you have not downshifted in time. Although SelectShift makes some downshifts for you, it still allows you to downshift at any time as long as the SelectShift determines that damage will not be caused to the engine from over-revving.
Note:
Engine damage may occur if you maintain excessive engine revving without shifting.
SelectShift does not automatically upshift, even if the engine is approaching the RPM limit. It must be shifted manually by pressing the + button.
- Press the (+) button to upshift.
- Press the (-) button to downshift.

The system determines when temporary manual control is no longer in use and returns to automatic control. The instrument cluster displays your currently selected gear.
Note:
The system stays in manual control until you make another shift selection (for example, drive [D]).
Brake-Shift Interlock
WARNING:
Do not drive your vehicle until you verify that the stoplamps are working.
WARNING:
When doing this procedure, you need to take the transmission out of park (P) which means your vehicle can roll freely. To avoid unwanted vehicle movement, always fully apply the parking brake prior to doing this procedure. Use wheels chocks if appropriate.
WARNING:
If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. Have your vehicle checked as soon as possible. |
Note:
See your authorized dealer as soon as possible if this procedure is used.
This prevents you from shifting the selector lever from the park (P) position, unless the brake pedal is pressed.
In the event of an electrical malfunction, or if the vehicle battery has run out of charge, use the following procedure to shift the selector lever from the park (P) position.
- Apply the parking brake and switch the ignition off.

- Use a suitable tool, for example a screwdriver, to carefully remove the housing cover.

- Locate the white lever, situated on the left hand side of the selector lever.

- Move the white lever toward the rear of your vehicle.
- Shift into neutral (N).
- Replace the selector lever housing cover.
- Apply the brake pedal and switch the ignition on.
- Release the parking brake.
Note:
Alternatively, we recommend that you seek advice from your dealer.
Automatic Transmission Adaptive Learning
This feature may increase durability and provide consistent shift feel over the life of your vehicle. A new vehicle or transmission may have firm shifts, soft shifts or both. This operation is considered normal and does not affect function or durability of the transmission. Over time, the adaptive learning process fully updates transmission operation.
If Your Vehicle Gets Stuck in Mud or Snow
Note:
Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur.
Note:
Do not rock the vehicle for more than a minute or damage to the transmission and tires may occur, or the engine may overheat.
If your vehicle gets stuck in mud or snow, you may rock it out by shifting between forward and reverse gears, stopping between shifts in a steady pattern. Press lightly on the accelerator in each gear.