Power Exterior Mirrors
WARNING   WARNING:  Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death.

Image Shown Without Description
ALeft-hand mirror.
BAdjustment control.
CRight-hand mirror.
To adjust a mirror:
  1. Press A or C to select the mirror you want to adjust. The control lights.
  2. Press B to adjust the mirror's position.
  3. Press the mirror control again. The light turns off.
Fold-Away Exterior Mirrors
 Push the mirror toward the door window glass. Make sure that you fully engage the mirror in its support when returning it to its original position.
Power-Folding Mirrors (If Equipped)
Electric Folding MirrorsTo fold both mirrors, make sure you switch your vehicle on (with the ignition in accessory mode or the engine running) and then:
  1. Press the control to fold the mirrors.
  2. Press the control again to unfold.
Note:   Once you press the control, you cannot stop the mirrors midway through their movement. Wait until the mirrors stop moving and press the control again.
Auto-Folding Mirrors (If Equipped)
Note:   The auto-fold mirrors operate only if they are in an unfolded position. If you folded the mirrors using the power-folding control, then you must unfold the mirrors using the power-folding control so the auto-fold feature can work.
The mirrors fold automatically when you lock the vehicle. The mirrors unfold when you unlock the vehicle.
You can switch this feature on or off using the vehicle settings menu in the information display.
Loose Mirror
If your power-folding mirrors are manually folded, they may not work properly even after you re-position them. You need to reset them if they:
  • Vibrate while driving or feel loose.
  • Do not stay in the folded or unfolded position.
To reset the power-fold feature:
  1. Use the power-folding mirror control to fold and unfold the mirrors.
  2. When you hear one or both of the mirrors make a loud noise, it means that you reset the mirrors successfully. This noise is normal.
  3. Repeat this process each time the mirrors are manually folded.
Even though the power-folding mirrors typically operate electronically, you can still fold and unfold them manually. After any manual adjustment, however, the power-folding mirrors become unsynchronized, even after repositioning them.
An unsynchronized mirror may:
  • Not fold or unfold normally.
  • Not stay in its set position.
  • Feel loose or even vibrate at normal driving speeds.
You can reset the mirrors by doing the following:
  1. Use the power-folding mirror control to fold and unfold the mirrors.
  2. When you hear one or both of the mirrors make a loud noise, it means that you reset the mirrors successfully. This noise is normal.
  3. Repeat this process each time the power-folding mirrors fold or unfold manually.
Reverse Mirror Dipping (If Equipped)
One of your exterior mirrors automatically dips down when you place your vehicle into reverse (R). This feature gives you a view of the curb.
To use, do the following:
  1. Select a mirror using the power mirror control.
  1. When you place your vehicle into reverse (R), the mirror automatically dips.
The exterior mirror automatically returns to its original position when:
  • Your vehicle speed exceeds 10 km/h (5 mph).
  • Your vehicle is no longer in reverse (R).
  • You switch the power mirror control off.
Setting a Reverse Mirror Dipping Position
  1. Switch the ignition on.
  1. Select the mirror you want to adjust.
  1. Put your vehicle into reverse (R).
  1. Re-position the mirror to your preference.
Note:   If you have already programmed a position, wait for the mirror to stop its movement before re-positioning it.
  1. Use the memory preset control to save the position. See  Memory Function . 
  1. Put your vehicle into park (P).
Heated Exterior Mirrors (If Equipped)
See   Heated Windows and Mirrors. 
Memory Mirrors (If Equipped)
You can save and recall the mirror positions through the memory function. See  Memory Function . 
Auto-Dimming Feature (If Equipped)
The driver exterior mirror automatically dims when the interior auto-dimming mirror turns on.
Direction Indicator Mirrors (If Equipped)
The outer portion of the appropriate mirror housing blinks when you switch on the direction indicator.
Blind Spot Monitor (If Equipped)
See  Blind Spot Information System . 

Owner's Manual Feedback

  • Please note that Ford will not respond to individual feedback.
  • Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
  • Your feedback will be investigated and any necessary changes will be updated in the online Owner's Manual. 

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.

Ok