Capacities
WARNING:
The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury. |
| Item
| Capacity
|
|---|
| Engine oil (with oil filter)
| 7.0 qt (6.6 L) |
| Engine coolant
| 21.3 qt (20.2 L) |
| Engine coolant - with auxiliary rear heat
| 30.7 qt (29.1 L) |
| Brake fluid
| Between MIN and MAX on brake fluid reservoir
|
| Power steering fluid
| Between MIN/MAX on power steering fluid reservoir
|
| Automatic transmission fluid
| 17.4 qt (16.5 L)1
|
| Dana Limited Slip Axle fluid
M70FF (M267FF)
E-350
| 6.6 pt (3.1L) 2
|
| Dana Limited Slip Axle fluid
M70HD (M273HD)
E-450
| 9.7 pt (4.6L) 2
|
| Dana conventional axle fluid
M70FF (M267FF)
E-350
| 6.6 pt (3.1L) 2
|
| Dana conventional axle fluid
M70HD (M273HD)
E-450
| 9.7 pt (4.6L) 2
|
| Windshield washer fluid
| Fill as required
|
| Fuel tank
| 40 gal (151 L) |
| Fuel tank
(Optional or E-Super Duty)
| 55 gal (208 L) |
| A/C refrigerant
| 1.9 lb (0.85 kg) |
| A/C refrigerant compressor oil
| 8.0 fl oz (237 ml) |
| A/C refrigerant compressor oil
(Prep package)
| 16.0 fl oz (473 ml) |
1 Approximate dry fill capacity. Actual amount may vary during fluid changes.
2Fill Dana rear axles to 1/4 inch — 9/16 inch (6 mm — 14 mm) below the bottom of the fill hole.
Specifications
Materials
| Name
| Specification
|
|---|
| Recommended motor oil (U.S.):
Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil
XO-5W30-QSP
| WSS-M2C946-B1
|
| Recommended Motor oil (Canada):
Motorcraft® SAE 5W-30 Super Premium Motor Oil
CXO-5W30-LSP12
| WSS-M2C946-B1
|
| Recommended motor oil (Mexico):
Motorcraft® SAE 5W-30 Synthetic Motor Oil
MXO-5W30-QSP
| WSS-M2C946-B1
|
| Optional motor oil (U.S. and Mexico):
Motorcraft® SAE 5W-30 Full Synthetic Motor Oil
XO-5W30-QFS
| WSS-M2C946-B1
|
| Optional Motor oil (Canada):
Motorcraft® SAE 5W-30 Synthetic Motor Oil
CXO-5W30-LFS12
| WSS-M2C946-B1
|
| Engine coolant (U.S. and Mexico):
Motorcraft® Orange Prediluted Antifreeze/Coolant
VC-3DIL-B
| WSS-M97B44-D2
|
| Engine coolant (Canada):
Motorcraft® Orange Prediluted Antifreeze/Coolant
CVC-3DIL-B
| WSS-M97B44-D2
|
| Brake fluid:
Motorcraft® DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid
PM-20
| WSS-M6C65-A2
|
| Power steering fluid and
Automatic transmission fluid (U.S. and Mexico):
Motorcraft® MERCON® LV Automatic Transmission Fluid
XT-10-QLVC
| WSS-M2C938-A
MERCON® LV
|
| Power steering fluid and
Automatic transmission fluid (Canada):
Motorcraft® MERCON® LV Automatic Transmission Fluid
CXT-10-LV12
| WSS-M2C938-A
MERCON® LV
|
| Dana Limited Slip axle fluid (U.S.):
Motorcraft® SAE 75W-140 Synthetic Axle Lubricant
XY-75W140-QL
| WSL-M2C192-A
|
| Dana Limited Slip axle fluid (Canada):
Motorcraft® SAE 75W-140 Synthetic Axle Lubricant
CXY-75W140-1L6
| WSL-M2C192-A
|
| Dana conventional axle fluid (U.S. and Mexico):
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
XY-80W90-QL
| WSP-M2C197-A
|
| Dana conventional axle fluid (Canada):
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
CXY-80W90-1L
| WSP-M2C197-A
|
| Windshield washer fluid (U.S. and Mexico):
Motorcraft® Premium Windshield Wash Concentrate with Bitterant
ZC-32-B2
| WSS-M14P19-A
|
| Windshield washer fluid (Canada):
Motorcraft® Premium Quality Windshield Washer Fluid
CXC-37-(A, B, D, F)
| WSS-M14P19-A
|
| A/C refrigerant (U.S.):
Motorcraft® R-134a Refrigerant
YN-19
| WSH-M17B19-A
|
| A/C refrigerant (Canada):
R-134a Refrigerant
CYN-19-R
| WSH-M17B19-A
|
| A/C refrigerant (Mexico):
Motorcraft® R-134a Refrigerant
MYN-19
| WSH-M17B19-A
|
| A/C refrigerant compressor oil:
Motorcraft® PAG Refrigerant Compressor Oil
YN-12-D
| WSH-M1C231-B
|
| Multi-purpose grease:
Motorcraft® Multi-Purpose Grease Spray
XL-5-A
| ESB-M1C93-B
|
| Lock cylinders (U.S.):
Penetrating and Lock Lubricant
XL-1
| -
|
| Lock cylinders (Canada):
Penetrating Fluid
CXC-51-A
| -
|
| Lock cylinders (Mexico):
Penetrating and Lock Lubricant
MXL-1
| -
|
| Door weatherstrips:
Silicone Spray Lubricant
XL-6
| ESR-M13P4-A
|
If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to:
- Component damage which is not covered by the vehicle warranty.
- Longer engine cranking periods.
- Increased emission levels.
- Reduced engine performance.
- Reduced fuel economy.
- Degraded brake performance.
We recommend Motorcraft® motor oil for your vehicle.If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that meet API SN Plus requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.

An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
Note:
Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure.
Note:
Automatic transmissions that require MERCON® LV transmission fluid should only use MERCON® LV transmission fluid.The use of any other fluid may cause transmission damage.
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance, we recommend that you use the following alternative engine oil in extremely cold climates, where the ambient temperature reaches
-22.0 °F (-30 °C) or below.
| Name
| Specification
|
|---|
| Motorcraft® SAE 0W-30 Premium Synthetic Blend Motor Oil:
Engine oil - SAE 0W-30
XO-0W30-QSP
| WSS-M2C953-A1
|
