Intelligent Oil-Life Monitor™
Your vehicle is equipped with an Intelligent Oil-Life Monitor that determines when you should change the engine oil based on how you use your vehicle. By using several important factors in its calculations, the monitor helps reduce the cost of owning your vehicle and reduces environmental waste at the same time.
This means you do not have to remember to change the oil on a mileage-based schedule. Your vehicle lets you know when an oil change is due by displaying a message in the information display.
The following table provides examples of vehicle use and its impact on oil change intervals. It is a guideline only. Actual oil change intervals depend on several factors and generally decrease with severity of use.

When to Expect the Message Prompting you to Change your Oil  
Interval   Vehicle Use and Example  
7,500–10,000 mi (12,000–16,000 km)   Normal  
Normal commuting with highway driving   No, or moderate, load or towing   Flat to moderately hilly roads   No extended idling  
5,000–7,500 mi (8,000–12,000 km)   Severe  
Moderate to heavy load or towing   Mountainous or off-road conditions   Extended idling   Extended hot or cold operation  
3,000–5,000 mi (5,000–8,000 km)   Extreme  
Maximum load or towing   Extreme hot or cold operation  

Normal Maintenance Intervals

At Every Oil Change Interval as Indicated by the Information Display1  
Change engine oil and filter.2  
Rotate the tires.  
Perform a multi-point inspection (recommended).  
Inspect the automatic transmission fluid level (if equipped with a dipstick). Consult your dealer for requirements.  
Inspect the brake pads, rotors, hoses and parking brake.  
Inspect the engine cooling system strength and hoses.  
Inspect the exhaust system and heat shields.  
Inspect the rear axle (All Wheel Drive vehicles only).  
Inspect the half-shaft boots.  
Inspect the steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints.  
Inspect the tires, tire wear and measure the tread depth.  
Inspect the wheels and related components for abnormal noise, wear, looseness or drag.  

1 Do not exceed one year or 10,000 mi (16,000 km) between service intervals.
2 Reset the Intelligent Oil-Life Monitor after engine oil and filter changes.   See   Oil Change Indicator Reset

Other Maintenance Items3  
Every 20,000 mi (32,000 km)   Replace cabin air filter.  
Every 30,000 mi (48,000 km)   Replace engine air filter.  
Every 40,000 mi (64,000 km)   Replace fuel filter (3.0L only).  
Every 100,000 mi (160,000 km)   Change engine coolant.4  
Every 100,000 mi (160,000 km)   Replace spark plugs.  
Inspect accessory drive belt(s).5  
Every 150,000 mi (240,000 km)   Change automatic transmission fluid.  
Replace accessory drive belt(s).6  

3 Perform these maintenance items within 3,000 mi (4,800 km) of the last engine oil and filter change. Do not exceed the designated distance for the interval.
4Initial replacement at six years or 100,000 mi (160,000 km), then every three years or 50,000 mi (80,000 km).
5After initial inspection, inspect every other oil change until replaced.
6If not replaced within the last 100,000 mi (160,000 km).